AM/FM
Multiplex Stereo Tuner Amplifier
You
are loking at the most practical solid state stereo receiver on the market
today. In design, performance and ease of operation, the Sansui 300 is without
peer in the 36 watt class. It offers a modern black face window panel with a
wide, linear scale FM tuning dial that is as functional as it is attractive. It
boasts a new FET front-end with 5-stage IF amplifier for top FM sensitivity and
selectivity. A wide 30 to 25,000 Hz power bandwidth (IHF) and a total marmonic
distortion of less than 1% at rated output. A hum and noise figure of better
than 65 dB at the phono input. And many other performance figures you'd only
expect to find on receivers costing twice as much. In operating ease, it
features conveniently arranged controls, the latest one-touch antenna and
speaker terminals, automatic stereo switching and is able to work off both 300
and 75 Ω antennas. But it is in the
field of FM reception that the Sansui 300 really shines. A new type of noise
canceler that eliminates noise without weakening FM program high frequency
characteristics and a built-in FM antenna are "first" for this price
range. All of these features combine to make the 300 the biggest value today in
quality audio equipment.
Specifications
Audio
Section
Music
Power Output (IHF): 36 W at 4 Ω; 32 at 8 Ω
Continuous
Power Output (each channel): 16/16 W at
4 Ω;
14/14 W at 8 Ω
Total
Harmonic Distortion: less than 1% at
rated output
Power
Bandwidth (IHF): 30 to 25,000 Hz (at 8 Ω load)
Frequency
Response (at normal listening level):
AuX over all
: 25 to 30,000 Hz ±2 dB
Channel
Separation (at 1 kHz rated output):
Phono : better than 40 dB
Aux : better than 45 dB
Hum and
Noise (IHF):
Phono : better than 65 dB
Aux : better than 70 dB
Input
Sensitivity (at 1 kHz rated output):
Phono
: 3 mV/ 50 k Ω
Aux
: 180 mV/ 100 k Ω
Tape
Mon (PIN) : 180 mV/ 100 k Ω
Tape
recorder (DIN) : 180 mV/ 100 k Ω
Recording
Output:
Tape Rec
(PIN): 180 mV
Tape
Recorder (DIN): 30 mV
Load
Impedance: 4 to 16 Ω
Damping
Factor: 20 at 8 Ω load
Equalizer
Phono: RIAA, NF type
Tone
Controls:
Bass : ±10 dB at 50 Hz
Treble
: ±10 dB at 10 kHz
Loudness
Control (volume control at -30 dB): +11
dB at 50 Hz ; +3 dB at 10 kHz
Switches
Selector
: Phono; FM Auto; AM;
Aux
Tape Monitor
: Off, On
Mode : Stereo, Mono
MPX Noise
Canceler : Off, On
Other
Special Features:
DIN
Connector for Tape Recorder, Direct Tape Monitor,Head Phone jack.
FM Tuner
Section
Tuning
Range: 88 to 108 MHz
Sensitivity:
20 dB
quieting : 2,5 µV
IHF : 3 µV
Harmonic
Distortion: less than 1%
Signal-to-Noise
ratio: better than 50 dB
Selectivity: better than 35 dB at 98 MHz
Capture
ratio (IHF): 3 dB
Image
Frequency Rejection: better than 45 dB
at 98 MHz
IF
Rejection: better than 60 dB at 98 MHz
Spurious
Response Rejection: better than 60 dB at
98 MHz
Spurious
Radiation: less than 34 dB
Antenna
Input Impedance: 300 Ω balanced / 75 Ω unbalanced
FM Stereo
Separation: better than 30 dB at 400 Hz
AM Tuner
Section
Tuning
Range: 535 to 1605 kHz
Sensitivity: 51 dB/m at 1 kHz (bar antenna)
Image
Frequency Rejection: better than 55 dB
at 1 kHz
IF
rejection: better than 45 dB
Selectivity: better than 20 dB
Other
Special Features: FM Linear Scale Dial;
Signal Strength Meter; Fly -wheel Tuning; AM ferrite Bar Antenna; MPX Noise
Canceler.
Semiconductors: 36 Transistors; 1 FET; 2 Varistors; 1
Thermistar; 18 Diodes; 1 Zener Diode.
Power
Requirement: 100,110,117,127,220,230,
240, 250 V 50/60 Hz
Power
Consumption: 15 VA (zero signal); 100 VA
(max signal)
Dimensions
(W x H x D): 15-7/8" x 4-9/16"
x 11-1/16"
Weight: 21 lbs