With all the
receivers to choose from,how do you make the right choice? By comparing power,
performance and price. It's the only meaningful way to tell how much receiver
you're getting for your money.
So compare.
As you can see,
Technics gives you a lot. A lot of power and a lot of performance at a avery
good price. That's because our receivers have the technology you need. Like
hefty transformers and big power capacitors to punch out deep bass notes with
authority. Like a dynamic headroom of 1,4 dB which means 38% extra power (above
RMS) on sudden musical transients.
Our phono sections
are just a s impressive. All have a very high Signal-to-Noise Ratio, which
means that even quiet musical passages come through clearly.
Yet each can handle
the high voltages generated by today's best records.
And when it comes to
FM, all Technics rceivers include MOS FET's for high sensitivity and low noise.
"Flat Group Delay" IF stages for clean signal processing. And
phase-locked-loop circuitry for accurate stereo imagimg.
With the SA-404 and
SA-505, you also get 10 LED peak-power indicators. And Acoustic Control that
gives you more control over both the bass and treble frequencies than is
possible with conventional tone controls.
Amplifier Section
Rated Power Output
(minimum sine wave RMS): 50 W per
channel into 8 Ω (20 Hz - 20 kHz both ch. Driven, 0,04% T.H.D.)
1 kHz Continuous
Power Output (both ch. Driven 0,04% T.H.D.):
55 W per channel
into 8 Ω
60 W per channel
into 4 Ω
Dynamic
Headroom: 1,4 dB 98 Ω)
Total Harmonic
Distortion
Rated Power at 20 Hz
- 20 kHz : 0,04% (8 Ω)
Half Power at 20 Hz
- 20 kHz : 0,02% (8 Ω)
Hale power at 1 kHz
: 0,009% (8 Ω)
SMPTE
Intermodulation Distortion: 0,04% (8 Ω)
Frequency Response:
Phono : RIAA standard curve +0,3 dB
Tuner, Aux, Tape
: 7 Hz - 45 kHz -1 dB (20 Hz - 20 kHz
±0,2 dB)
Input Sensitivity:
Phono : 0,4 mV (2,5 mV, IHF'66)
Tape 1, 2 : 20 mV (150 mV, IHF'66)
Signal-to-Noise
Ratio (IHF, A)
Phono : 73 dB (80 dB, IHF'66)
Tuner, Aux, Tape
: 78 dB (95 dB, IHF'66)
Maximumm Input
Voltage:
Phono : 120 mV (150 mV, 1 kHz)
Input Impedance
Phono : 47 k Ω
Tape 1, 2 : 27 k Ω
Tone Controls
Bass : ±10 dB at 50 Hz
Treble ; ±10 dB at 20 kHz
Acoustic Controls
(at tone "0" position):
Low Boost : 100 Hz, +6 dB
High Boost : 10 kHz, +6 dB
Low Filter: 100 Hz, -6 dB/oct
High Filter : 7 kHz, -6 dB/oct
Loudness Control
(volume at -30 dB): 50 Hz, +9 dB
Output Voltage
Rec Out : 150 mV
Low Frequency
Damping Factor: 34 at 8 Ω; 17 at 4 Ω
Load Impedance
Main or Remote: 4- 16 Ω
Main and Remote
: 8 - 16 Ω
FM Tuner Section
Frequency
Range: 88 - 108 MHz
Sensitivity: 10,8 dBf (1,9 µV, IHF'58)
50 dB Quieting
Sensitivity
Mono : 13,7 dBf (2,7 µV, IHF-58)
Stereo : 37,2 dBf (39,7 µV, IHF'58)
Total Harmonic
Distortion
100 Hz : 0,15% (mono ); 0,3% (stereo)
1 kHz : 0,15% (mono): 0,3% (stereo)
6 kHz ; 0,3% (mono); 0,4% (stereo)
Signal-to-Noise
ratio
Mono : 75 dB
Stereo : 70 dB
Frequency
Response: 20 Hz - 15 kHz +1 dB, -2 dB
Alternate Channel
Selectivity: 70 dB
Capture Ratio: 1,2 dB
Image Rejection (98
MHz): 60 dB
IF Rejection (98
MHz): 75 dB
Spurious Response
Rejection (98 MHz): 82 dB
AM Suppression: 55 dB
Stereo Separation:
At 1 kHz : 45 dB
At 10 kHz : 35 dB
Carrier leak:
At 19 kHz : -40 dB
At 38 kHz ; -50 dB
Antenna Terminals
: 300 Ω (balanced), 75 Ω (unbalanced)
AM Tuner Section
Frequency
Range: 525 - 1605 kHz
Sensitvity: 30 µV, 300 µV/m
Selectivity: 30 dB
Image Rejection
(1000 kHz): 50 dB
IF Rejection (1000
kHz): 40 dB
General
Power
Supply/Consumption: AC 120 V, 60 Hz / 300 W, 345 VA
Dimensions (W x H x
D): 480 x 160 x 293 mm (18-29/32" x
6-5/16" x 11-17/32")
Weight: 8,4 kg (18,5 lbs)