RB-1000 Power
Amplifier
A stereo power
amplifier FTC rated for 8 ohms at 65 watts RMS per channel, 20 to 20,000 Hz ,
at a distortion no higher than 0,003% T.H.D.
There is one set of
line level stereo inputs. Putputs for two speaker systems. An output hold-off
prevents power supply turn-on transients from being fed to the speakers. The
front panel has controls for left input level and right input level. Switches for
power, speaker system A, and speaker system B. two switched AC outlets are
provided.
Performance. The
power output per channel at the clipping level with both channels driven 20 to
20,000 Hz measured 66 watts RMS. The Frequency Response at 66 watts/8 ohms was
"ruler flat" from 20 to 20,000 Hz at a distortion no higher than 0,022%
T.H.D. at any frequency.
Overall dimensions
are 16-15/16-inch (wide), 3-27/32-inch (high), 11-11/32-inch (deep). Weight is
15,6 lbs.
Continuous Power
Output: 65 watts per channel min. RMS
both channels driven into 8 Ω or 75 watts per channel both channels driven into
4 Ω from 20 Hz to 20 kHz with no more than 0,03% T.H.D.
Total Harmonic
Distortion (20 Hz to 20,000 Hz):
No more than 0,03%
(continuous rated power output)
No more than 0,01%
(32,5 watts per channel power output,, 8 Ω)
No more than 0,01%
(1 watt per channel power output, 8 Ω)
Intermodulation
Distortion (60 Hz : 7 kHz = 4 : 1):
No more than 0,03%
(continuous rated power output)
No more than 0,01%
(32,5 watts per channel power output,, 8 Ω)
No more than 0,01%
(1 watt per channel power output, 8 Ω)
Frequency
Response: 5 - 100,000 Hz +0 dB -1 dB (1
watt per channel power output, 8 Ω)
Input
Sensitivity/Impedance: 1 V/20 k Ω
Damping Factor: 50 (20 - 20,000 Hz , 8 Ω)
Hun and Noise: 110 dB )IHF, A network)
Residual Noise: 150 µV
Crosstalk (10
kHz): 55 dB
Power
Requirements: 120 V/60 Hz or 220 V/50
Hz or 240 V/50 Hz or 100, 120, 220, 240 V \; 50/60 Hz
Power
Consumption: 500 watt max
Dimensions (W x H x
D): 430 x 98 x 290 mm
Weight: 7,1 kg (15,62 lbs)