Pioneer AM/FM Stereo Tuner with exceptional selectivity, sensitivity and tonal characteristics, along with advance front-end circuitry.
Replete with advanced features and boasting exceptionally high performance characteristics, Pioneer's Model TX-800 AM/FM Stereo Tuner is perfect for the serious audiophile who is satisfied with nothing less than peak sensitivity and selectivity. This new unit is one of Pioneer's finest, it reflects the very latest audio technology and is an especially valuable piece of equipment when used in areas where a multitude of FM stations dominate the airwaves. Specifications, as might be expected from such a piece of quality workmanship, are first-rate. Image rejection, cross modulation rejection and spurious signal rejection are highly improved to provide the type of sensitivity so vital to quality FM reception. Then there's large linear dial scale and dual tuning meters that assure both fine selectivity and ease-of-operation.
Features
FET-equipped FM Front-End
The FM front-end, the section which directly receives the signal from the antenna - is equipped with a field effect transistor (FET), a third-generation solid state component with characteristics that go a long way towards improving the tuner's sensitivity, selectivity, and freedom from cross-modulation. Other benefits include a better Signal-to-Noise Ratio, lower intermodulation distortion and improved spurious response.
Integrated Circuits in IF Stage
The IF (Intermediate Frequency) stretch includes three integrated circuits (ICs) and three ceramic filters, factor which improve the tuner's selectivity. Also, the FM MPX decoder (the part that separates the two channels of FM stereo broadcasts) operates on the accurate time switching principle, a guarantee of efficient channel separation. To reduce noise, in FM stereo programs, a special filter switch is provided.
Easy Tuning with two meters and FM muting Switch
Accurate tuning is made easy by the two large tuning and signal strength meters. Irritating inter station noise on FM is eliminated by the FM muting switch.
FM Multipath jacks for precise antenna orientation
FM multipath reception, one of the greatest enemies of FM hi-fi sound, can be reduced or eliminated only by careful positioning of the antenna. The optimum antenna direction can be found with precision by plugging an oscilloscope (or the Pioneer stereo display unit, model SD-1000) to the tuner's special FM multipath jacks.
Fine AM reception with movable ferrite antenna
The AM ferrite core antenna can be rotated freely to obtain maximum sensitivity under all conditions. This and the tuned AM rf circuit assures clean, sharp AM reception.
Versatile auxiliary circuits
Separate output level controls are provided for AM and FM making it easy to balance their respective sound volumes. Output jacks permit direct connection of a tape deck. FM antenna connection can be made with 300 Ω feeder or 75 Ω coaxial cable, because two sets of terminals are provided.
Pioneer, special technical elegance
The front panel design emphasizes that unique "technological" elegance that you;ve come to expect from Pioneer. With its wooden cabinet, model TX-800 harmonizes perfectly with other Pioneer hi-fi components.
Specifications
FM Tuner Section
Frequency Range: 88 - 108 MHz
Usable Sensitivity (IHF): 1,8 µV
Capture Ratio (IHF): 2 dB
Selectivity (IHF): more than 70 dB
Image Rejection: more than 85 dB (at 98 MHz)
IF Rejection: more than 100 dB (90 MHz)
Spurious Rejection: more than 90 dB (98 MHz)
sAM Suppression: 50 dB
Signal-to-Noise Ratio: 70 dB
Total Harmonic Distortion
Mono : less than 0,4% (100% mod)
Stereo : less than 0,5% (100% mod)
Tuning Indicator: Signal strength type and Center Tuning type
Muting: Switchable to On-Off
Stereo Separation: more than 40 dB (1 kHz)
Subcarrier Suppression: more than 50 dB
Noise Filter: Switchable to On-Off
Output Voltage: Controllable, from 8-0 mV to 2,4 V (100% mod)
Antenna Input: 300 Ω (balanced); 75 Ω (unbalanced)
AM Tuner Section
Frequency Range: 525 - 1605 kHz
Usable Sensitivity (IHF): 10 µV
Selectivity (IHF): more than 30 dB
Image Rejection: more than 80 dB (1,000 kHz)
IF Rejection: more than 70 dB
Signal-to-Noise Ratio: more tha 50 dB
Output Voltage: Controllable, from 80 mV to 2,4 V (110% mod)
Antenna: Built-in Ferrite Loopstick Antenna
Audio Section
Recording Output/ Impedance: 750 mV/2,5 k Ω (FM 100% mod)
Level Control: Am and FM
Semiconductors: 29 Transitors; 18 Diodes; 4 ICs; 2 FET
General
Power Requirements: 120 V, 60 Hz
Power Consumption: 25 W
Dimensions (W x H x D): 430 x 145 x 345 mm (16-15/16" x 5-11/16" x 13-9/16")
Weight: 7,3 kg (16 lbs)