In your hi-fi home system, the amplifier's job is to give your power and control of sound. The tuner is there to provide you with the best possible means of receiving radio signals. And a receiver is quite simply an amplifier and tuner combined into one.
The Akai AA-1010 packs a powerful punch of 14 watts per channel RMS at 8 ohms, both channels driven. Bandwidth runs from 40 to 20,000 kHz with no more than 0,8% total harmonic distortion. At the 1 kHz point, the power is at least 16 watts per channel into 8 ohms, both channels driven. So the specified power rating is a minimum figure.
The tuner sensitivity is, for this class of machine, a remarkable 2,0 µV. there's a Phase-Lock-Loop circuit in the FM Multiplex section to produce complete stability with separation better than 40 dB. The styling is smart professional-looking. There's the large precision balanced heavy-weight flywheel for fast and accurate tuning.
There's an FM/AM tuning meter. An FM stereo lamp. There's an input selector switch for AM/FM/Phono/Aux. A stereo/mono mode selector switch. A Tape Monitor On/Off switch. The Loudness control switch boosts the high and low frequency signals for perfect subjective sound balance at low volume. The power On/Off switch also controls speaker selection: A/OFF/B/A+B. Separate bass and treble tone control knobs. The volume control knob. A stereo headphone output jack. And round the back is a highly sensitive AM ferrite bar antenna.
Specifications
Amplifier Section
Continuous Power Output (both channels driven): 14 W per channel RMS at 8 Ω from 20 - 20,000 Hz
Total Harmonic Distortion: less than 0,8%
Power bandwidth (IHF): 15 to 40,000 Hz
Input Sensitivity/Impedance:
Phono : 3 mV/47 k Ω
Aux : 150 mV/100 k Ω
Tape : 150 mV/100 k Ω
Signal-to-Noise Ratio (IHF)
Phono : better than 80 dB
Tone Controls
Bass : ±10 dB at 100 Hz
Treble : ±10 dB at 10 kHz
Phono Equaliser: RIAA ±1 dB
Loudness Control (volume at -30 dB): 100 Hz (+10 dB) / 10 kHz (+6 dB)
FM Tuner Section
Frequency Range: 88 MHz to 108 MHz
Sensitivity (IHF): 1,5 µV
Capture Ratio (IHF): 2,0 dB
Selectivity (IHF): better than 60 dB
Signal-to-Noise Ratio : better than 65 dB
Image Rejection: better than 55 dB
IF Rejection: better than 70 dB
T.H.D. Stereo : less than 0,6%
AM Tuner Section
Frequency Range: 552 kHz to 1605 kHz
Sensitivity (IHF): 200 µV (bar antenna); 8 µV (ext. Antenna)
Selectivity (IHF): better than 30 dB at 1,000 kHz
AM Distortion: less than 1,0%
Signal-to-Noise Ratio : better than 45 dB
Dimensions (W x H x D): 440 x 125 x 265 mm (17,3" x 4,9" x 10,4")
Weight: 6,4 kg (14,0 lbs)