DBX 110 - Subharmonic Synthesizer
The Model 110 is a unique product that can solve one frequency response problem common to all stereo systems. Right now, your system can't produce bass frequencies much below 50 Hz, simply because that's the limit of most records, tapes and FM signals. That means you don't get the deepest bass notes, the kind you feel as well as hear. The Model 110 corrects that problem. Technically, what the 110 does is easily understood. It samples the low frequency fundamentals of your music. Then it passes these signals through while simultaneously reproducing them a full octave lower. both signals are then mixed back in at relative levels that you control.
Musically, what the 110 does is extraordinary. it re-creates the natural subharmonics of the original sound, making your room vibrate with a depth of bass you've never heard before - or felt - except in a live performance.
Specifications
Dynamic Range (Peak signal to weighted background noise): 100 dB
Input Impedance : 47 k Ω
Input Level (Nominal): 300 mV
Input Level (Maximum): 7 V RMS
Output Impedance (Designed to drive 5 k Ω or greater): 470 Ω
output Level (Maximum): 20 Hz to 20 kHz): 7 V RMS
Frequency Response: 20 Hz to 20 kHz ±1 dB
Equivalent Input Noise (Unweighted, 20 kHz bandwidth, referenced to 1 V): -85 dBV
Total harmonic Distortion: 0,1% (Typical, main signal channel)
Intermodulation Distortion (SMPTE): 0,15% Main signal channel
Power Line Requirement: 117 V AC, 50 Hz to 60 Hz
Power Line Consumption: 10 W
dimensions (W x H x D): 186 x 95 x 263 mm (7-5/16" x 3-3/4" x 10-3/8")
Weight: 2,26 kg (5 lbs , shipping)
No comments:
Post a Comment