Stereo Receiver
25 watts per channel (20 Hz - 20 kHz)
Four wavebands: VHF, MW, LW and SW
One touch programme sensor, a new system which has all the convenience of pre-sets with advantage of a visual display of the station location. Five stations can be programmed on VHF and five on LW, and then recalled by direct access push buttons
Five segment LED signal strength indicator which tells you precisely how strong a signal you are receiving
Loudness control
Headphone socket
Specifications
Amplifier Section
Rated Output (RMS): 25 W/ch (20 - 20,000 Hz, 8 Ω )
Total Harmonic Distortion: 0,3% at rate output
Inputs /Sensitivity/Impedance
Phono : 2,5 mV/50 k Ω
High Level Inputs : 150 mV/50 k Ω
Outputs Level/Impedance
Rec Out : 150 mV/ 10 k Ω
Speakers : 8 Ω
Headphones : 8 Ω
Frequency Response: Phono RIAA equalisation curve ±1 dB, 10 - 50,000 Hz +0/-1 dB
Signal-to-Noise Ratio:
Phono : 70dB
Others : 90 dB
FM Section
Tuning Range: 87,5 - 108 MHz
Sensitivity: 1,9 µV (IHF)
Capture Ratio: 1 dB
Selectivity: 55 dB
Frequency Response:30 - 15,000 Hz +0,5/-2 dB
Stereo Separation: 45 dB (1 kHz)
Aerial Terminals: 300 Ω (balanced); 75 Ω (unbalanced)
AM Section
Tuning Range:
MW : 530 - 1605 kHz
LW : 150 - 350 kHz
SW : 5,8 - 15,8 MHz
Aerial: built-in ferrite bar (LW), attached antenna wire (MW), external aerial terminals (MW, LW)
General
Power Requirements: AC 240 V, 50 Hz
Power Consumption: 240 watts
Dimensions (W x H x D): 430 x 145 x 310 mm
Weight: 7,6 kg