What is stereo?

There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.

H.H. Scott '59

H.H. Scott 3300

 Exclusive Scott perfectune.
The world's most accurate and reliable tuning device, obsoletes center-tuning meters by employing a digital computer to automatically flash an indicator panel light when best tuned for maximum reception (absolute center channel and lowest distortion).

True AM high fidelity
After years of costly experimentation, Scott engineers discovered the answer underlying true Am high-fidelity. Distortion so low that Scott AM is virtually undistinguishable from FM. Employing latest FET and Integrated Circuit techniques in the 3300, they throughly eliminated interference and drift. Weak stations now assume a new clarity, strong stations become totally distortion-free, and a new FET mixer improves cross modulation rejection and cuts adjacent stationinterference.

Solderless wire connections
A scott exclusive, "tension wrap" each wire around a terminal under tremendous torsion. Consequently, the 3300 possesses a dependability akin to aerospace and computer applications because the problems of cold or unsoldered connections are drasticly reduced.
 The world's first high fidelity IC Multiplex section (no larger overall than a cigarette filter) incorporates 31 transistors, 10 diodes and 29 resistors to ensure superior reliability and superior FM streo separation than conventional printed circuit construction.

Scott's quartz crystal lattice filter
In the tuner IF section never requires realignment or adjustment. Never … regardless of age or operating temperature. This revolutionary feature, never found before in receivers in this price range, also yields the extra divident of very low distortion and incredible selectivity.

F/C/O Circuity
Provides close to distortion-free listening, even at low volume levels. The 3300 incorporates Full Complementary Output Transistors to achieve perfect undistorted sound, over a wide power bandwidth at both 8 and 4 ohms … a vital factor when connecting extra speakers.
Amplifier Section
Total Power:  130 watts at 4 Ω ±1 dB
IHF Music Power:  100 watts at 8 Ω
Continuous Power Output:
40 / 40 watts at 4 Ω
33 / 33 watts at 8 Ω
Harmonic Distortion:  0,8% at rated output
IHF Power Bandwidth:  20 Hz - 30 kHz
Input Sensitivity
Phono : 3,0 mV
Extra :  0,50 V
Tape :  0,50 V
Hum and Noise (below rated output):
Phono :  60 dB
Extra :  70 dB
Tape In :  70 dB
FM Multiplex Tuner Section
Tuning Range:  88 - 108 MHz
Sensitivity:  1,8 µV
Signal-to-Noise Ratio:  65 dB below 100% mod.
Total Harmonic Distortion:  0,6%
Frequency Response (FCC limit):   50 - 15,000 Hz, ±1 dB
Capture Ratio:  2,5 dB
Dial Calibrtion Accuracy:  0,5% of station freq.
AM Suppression:  55 dB
Separation at 400 Hz:  35 dB
Cross Modulation Rejection:  90 dB
FM Muting Switching Level:  3 - 30 µV (adjustable)
AM Tuner Section
Tuning Range:  535 - 1620 kHz
Bandwidth:  -3 dB = 8 kHz;  -6 dB = 10 kHz
Selectivity:  32 dB
THD (60% modulation):  2,0%
Usable Sensitivity:  100 µV/m at 600 kHz
Hum and Noise:  40 dB below 100% mod.
Spurious Response Rejection:  better than 60 dB
IF Rejection:  better than 33 dB

Image Rejection:  better than 48 dB

Nessun commento:

Posta un commento