AM/FM
Multiplex Stereo Tuner Amplifier Solid State
This
attractive solid state introduces a whole new performance standard for
receivers in the medium power range.
With a new FET frontend for increased FM sensitivity, input terminals
for both 75 and 300 ohms antennas, and an FM channel separation figure of
better than 35 dB, it is perhaps the finest performing FM receiver ever made
under 100 watts.
Its audio
characteristics are also superb a power
bandwidth from 20 to 40,000 Hz, distortion factor of less than 1% at rated
output and damping factor of 60 at 8 ohms.
Other
features include short-free output terminals for two complete speaker systems,
a new type of noise canceler, automatic FM mono/stereo switching with
indication and the latest black window design.
Specifications
Amplifier
Section
Music
Power (IHF): 70 watts ±1 dB at 4 Ω
Continuous
Power: 28 / 28 watts ±1 dB at 4 Ω
Harmonic
Distortion: less than 1% at rated output
Power
Bandwidth (IHF): 20 - 35,000 Hz at 8 Ω
Input
Sensitivity:
Phono : 2,2 mV ±3 dB
Aux : 150 mV ±3 dB
Tape Monitor
(PIN): 150 mV ±3 dB
Tape Monitor
(DIN): 150 mV ±3 dB
Hum and
Noise (IHF):
Phono : 70 dB
Aux : 70 dB
Damping
Factor: 60 at 8 Ω
FM Tuner
Section
Frequency
Range: 88 - 108 MHz
Sensitivity: 2 µV ±3 dB (20 dB quieting)
Sensitivity: 2,8 µV ±3 dB (IHF)
Selectivity: better than 45 dB
Capture
Ratio: 3 dB (IHF)
FM Stereo
Separation: better than 35 dB
AM Tuner
Section
Frequency
Range: 535 - 1,605 kHz
Sensitivity
(IHF): 22 µV ±3 dB at 1 kHz
Transistors
and FET: 36
Diodes
: 20
Varistor
: 6
Power
Voltage: 100, 117, 220, 1nd 240 V, 50 Hz
or 60 Hz
Power
Consumption: 18 VA (zero signal) 110 VA( max signal)
Dimensions
(W x H x D): 15-13/16"x 4-1/2"
x 13-1/8"
Weight: 23,1 lbs
Nessun commento:
Posta un commento