TC-720 - the
3-head deck for the creative recordist
If you like
to get involved with your tape recording, this is the deck for you. The bias
rotary control and built-in pink noise generator allow you to fine-adjust the
deck's high frequency response to best suit the particular tape you are using.
The Rec Level ADJ controls and Rec Cal switch allow you to further adjust the
recording sensitivity for proper Dolby NR tracking, resulting in very high
Signal-to-Noise ratio and exceptionally clean sound. The TC-720 also has a
unique built-in "real time" echo facility. You can use this to add
new dimensions of studio realism to tapes recorded for playback in both your
car and your home. All these front panel features (and more) are backed by
reliable, advanced electronics. The Closed-Loop Dual Capstan Drive keeps the
tape at an ideal tension for smooth head contact. An advanced Frequency
generator servomotor transports the tape at a constant, accurate speed with
very high torque. High-performance, low-noise amplifying circuits are used for
the mic and line inputs. All this superior performance is wrapped in a
beautiful simulated ebony cabinet.
Specifications
Type: 4-track, 2-channel stereo cassette deck
Tape
Speed: 4,8 cm/sec
Motor: F.G. servo motor
Wow and
Flutter: less than 0,06% (WRMS); 0,2%
(DIN, 45 500)
Fast
Forward/Rewind Time: within 90 seconds
with C-60 tape
Recording
/Playback Frequency Response:
LH tape
: 30 to 15,000 Hz (40 - 13,000 Hz ±3 dB)
CrO₂ Tape
: 30 to 17,000 Hz (40 - 15,000 Hz ±3 dB)
Total
Harmonic Distortion;
LH Tape
: less than 1,5%
CrO₂ Tape
: less than 2,0%
Signal-to-Noise
ratio: . 57 dB (JIS)
Dolby NR
Effect: 9 dB
Channel
Separation: better than 30 dB (at 1 kHz)
Bias
Frequency: 105 kHz
Bias
Selector: LH, CrO₂
Equalizer
Selector:
LH Tape
: 120 µSec +3180 µSec
CrO₂ tape
: 70 µSec + 3180 µSec
Input
Sensitivity/Impedance
Mic : 0,3 mV/5 k Ω
Line : 50 mV/50 k Ω
Output
Level/Impedance:
Line : 0,4 V/less than 5 k Ω
Phones
: 1 mW/8 Ω, 3mW/150 Ω
Echo Effect
Volume: 0 to Max continuous variable
Bias Current
Control Range: ±15%
Calibration
Signal: Pink noise
Recording/Playback
head: Ferrite (conbination)
Erasing
head: ferrite
Monitor
Switch: Tape, Source Selector
Semiconductors: 17 Transitors; 27 Diodes; 8 IC's, 1 LED's
Power
Supplies: 110 - 130 V / 220 - 240 V AC
50/60 Hz
Power
Consumption: 14 W
Dimensions
(W x H x D): 435 x 150 x 288 mm
(17-1/8" x 6" x 11-1/4")
No comments:
Post a Comment