Straight
DC and Diamond Differential DC - Two Sansui Original Circuit Designs for Lower
TIM, Purer Sound
Fresh,
dynamic musical reproduction. It's the result of Sansui's advanced amplifier
technology, taking a new and in-depth look at the causes of coloration of tonal
quality and fuzziness in stereo imaging. And finding ways to end them.
Some of
the things we've discovered are truly amazing. TI (that's Transient
Intermodulation) distortion, for instance is one of the things that stand in
the way of pure musical reproduction. We/ve lowered the TIM and improved the
slew rate dramatically in all our AU integrated amps, the AU-519 included
All-DC design and Sansui's pat pend "Diamond Differential DC" circuit
give us tremendous advantages over the competition.
Power output in the AU-519 is a pleasing 70 watts per channel, min.
RMS, both channels driven into 8 Ω , from
10 to 20,000 Hz with no more than 0,008% Total Harmonic Distortion. It adds up
to a medium priced "best-buy" amp from the prestigious AU lineup by
Sansui, where it's all hi-fi.
Specifications
Power Output (min. RMS, both channels driven into 8 Ω , from 10 to 20,000 Hz with no more
than 0,008% Total Harmonic Distortion) :
70 watts per channel into 8 Ω
Load Impedance: 8 Ω
Total
Harmonic Distortion (Power Amp IN): less
than 0,008% at or below rated min. RMS power output
Intermodulation
Distortion (70 Hz :7 kHz = 4:1 SMPTE method):
less than 0,008% at or below rated min. RMS power output
Rise
Time: 0,5 sec
Slew
Rate: 160 V/µsec
Frequency
Response (Power Amp IN) : DC to 400 Hz
+0 dB -3 dB (at 1 watt)
Damping Factor (Power Amp IN):
100 into 8 Ω
(at 1 watt)
RIAA
Curve Deviation (Phono 20 Hz -20 kHz):
±0,2 dB
Input
Sensitivity/Impedance (1 kHz, for rated power output):
Phono 1 , 2 : 2,5 mV/47 k Ω
Aux, Tuner,Tape : 150 mV/47 k
Ω
Power Amp In : 1 V/47 k Ω
Output
Level/Impedance (1,000 Hz)
Tape Rec : 150 mV into 47 k Ω / 600 Ω
Preamp Out : 1 V into 47 k Ω / 400 ojm
Channel
Separation (1 kHz, at rated power output)
Phono 1,
2 : 70 dB
Aux,
Tuner, tape Play : 75 dB
Hum and
Noise (short-circuit, A-network)
Phono 1,
2 : 88 dB
Aux,
Tuner, Tape Play100 dB
Controls
Bass
: ±10 dB at 50 Hz
Treble
: ±10 dB at 15 kHz
Subsonic
: -3 dB (16 Hz), 6 dB/oct
Loudness
(Volume control at -30 dB position)
10 dB at
50 Hz
8 dB at
10 kHz
Power
Requirements: 100, 120, 220, 240 V 50/60
Hz
Power
Consumption: 580 watts (max), 360 watts
440 VA (rated)
Dimensions
(W x H x D): 430 x 168 x 390 mm
(16-15/16" x 6-5/8" x 15-3/8")
Weight: 15,6 kg (34,4 lbs) net
Nessun commento:
Posta un commento