What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.



H.H. Scott '59





Royd Eden loudspeakers

The Eden loudspeaker

The Eden is the latest and most exciting development if our range of compact loudspeakers. It is the logical step forward from our established A7 and Coniston R models and as such represents the result of 7 years of continuous research and development. We believe The Eden offers the most satisfying musical performance for a loudspeaker of its size in today's market. Like all our compact loudspeakers it is designed to be used close to a wall.

 the Eden features Royd's unique modified reflex bass loading to give you accurate bass reproduction and underpin the outstanding musical performance. Cabinet panel resonances have been eliminated by very heavy and rigid laminated construction.

The drive units developed for this loudspeaker are ideally matched to each other and to the cabinet. The tweeter is a 19 mm polyamide dome with vented centre magnet system and dual cavity, critically damped, rear loading to give you exceptional transparency and clarity. The coil is wound on an aluminium former and is cooled and damped by ferrofluid. The bass unit chassis is an aluminium die casting to provide the strength and rigidity essential for fast and accurate sound reproduction and is retained in the cabinet by eight screws reinforced by silicone rubber sealing. The chassis also provides the large free area behind the cone essential to minimise reflection of sound waves and give you uncluttered, detailed reproduction. Because the drive units are so well matched, the crossover circuit is uncomplicated thus allowing the signal from your amplifier to be revealed unhindered.

The loudspeakers are available in either passive form with internal crossovers, at extra cost, are available for use with the active version.

The speaker are designed for use on good quality stands or wall brackets, with their backs close to a wall.

 


Specifications:

Recommended Amplifier Power:  20 - 40 watts

Sensitivity:  90 dB

Peak Power Handling:  60 watts

Nominal Impedance:  8 Ω

Crossover Frequency:  4 kHz

Bass Resonance Frequency:  57 Hz

Dimensions (W x H x D):  203 x 305 x 190 mm

Weight:  14 lbs

Finish:  Walnut or Black Ash Veneer

Nessun commento:

Posta un commento

Iscriviti a: Commenti sul post (Atom)