Although conservatively rated at 20 watts per channel into 8 ohms, the new Hk350i has the ability to develop great amounts of instantaneous power to handle peak loads. The result is an economical receiver that will outperform conventional receivers of the same power rating.
To ensure optimum separation and minimum distortion under all operating conditionas, the HK350i uses phase-locked loop circuitry in the tuner section. This system senses any phase error in the broadcast system and automatically makes the necessary corrections, providing better stereo separation and Total Harmonic Distortion levels than in conventionals tuners. The Hk350i also features our new stereo blend control that allows your speakers to sound their best even when they cannot be positioned perfectly.
The HK350i lso offers more convenience features than you'd expect from an economy receiver. Like LED signal strength meter, tpe monitor function, FM muting loudness contour, and accommodations for two pairs of speakers.
The Hk350i, although it's our lowest priced receiver, it gives you the ame advanced technology found only on the most expensive esoteric equipment.
Specifications
Amplifier Section
RMS Power Output (into 8 Ω , 20-20,000 Hz): 20 watts (at less than 0,09% T.H.D.
Frequency Response (at rated output): below 3 Hz - 120 kHz (-3 dB)
Intermodulation Distortion (at rated output): ,09%
TIM Distortion (at rated output): ,06%
Slew Rate/Power Amplifier: 40 volts/µsec
Overall Negative Feedback: 30 dB
Hum and Noise (A-weighted):
Phono : -85 dB
Aux : -95 dB
Residual : -95 dB
Phono Overall: >100 mV
Tuner Section
FM Sensitivity MONO: 2,5 µV
50 dB Quieting Sensitivity
Mono : 3,5 µV
Stereo : 45 µV
FM Noise: -65 dB
Capture Ratio: 2,0 dB
Alternate Channel Selectivity: -60 dB
Stereo Separation (1 kHz): 40 dB
FM Frequency Response at Detector Output: DC -60 kHz (-3 dB)
AM Sensitivity: 300 µV/m
Dimensions (W x H x D): 440 x 122 x 368 mm
Weight: 8,13 kg
Nessun commento:
Posta un commento