Full-Automatic Direct-Drive Turntable
Fully automatic operation with all controls on the front panel provides outstanding convenience in each model; the HT-61S (HT-R10) gives you a few extras. In short, these turntables leave nothing to be desired. This TH-R10 can be used with the RM-1000 remote control center for extra convenience, too.
Automatic disc Size/Speed Selection
The HT-61S/R10 uses a light beam to sense the size of the record on the platter and automatically set the lead-in for either 30-cm or 17-cm, so the stylus will lower to exactly the right place. At the same time, platter speed is automatically set to the corresponding speed; 33-⅓ or 45 rpm. This makes operation surer and more convenient, putting the HT-61S/R10 another step above ordinary turntables.
All Controls Up Front
All Control functions are located on top of the turntable's front panel. They are accessible when the dust cover is down, preventing the possibility of jarring the tonearm during play. And thanks to the use of IC logic circuitry, it only takes a feather touch to operate all controls.
Other features:
Quartz Lock Plus High Torque Equals Speed Accuracy,
Unitorque Motor,
Gimbal-Suspension Straight Tonearm,
Photo Sensor Arm Return System
Resonance-absorbing base
Anti-feedback insulator feet
Removable, hinged dust cover
High quality headshell ideally matched to tonearm
Optional remote control capability for HT-R10
Specifications:
Type: Full automatic, 2-speed, quartz lock , direct-drive
Platter: Aluminum alloy diecast 310 mm outer diameter
Motor: Brushless coreless, slotless "Unitorque" motor; DC motor for arm movement.
Speed: 33-13 and 45 rpm
Speed Change System: Electronic changeover system
Signal-to-Noise Ratio: 78 dB (DIN-B)
Wow and Flutter: 0,025% WRMS
Speed Accuracy: 0,003%
Speed Drift
Time : 0,003% (30 sec - 303 min)
Temperature : 0,003% (5 - 35°C)
Tonearm
Type: Static-balanced, straight
Headshell: ADC type
Tracking Error: 2°
Adjustable Force Range: 0 - 3 g / 1 turn of the balance weight (directly readable in 0,1 g steps)
Acceptable Cartridge Weight: 4 - 10 g
General
Dimensions (W x H x D): 435 x 365 x 110 mm (17-1/8" x 14-3/8: x 4-5/16")
Weight: 6 kg (13 lbs 3 oz)
Nessun commento:
Posta un commento