FM Stereo FM/AM Receiver
Sony leadership in every aspect of audio and video reproduction is legendary. That leadership is no accident, nor is it recent. It arises from three sources. First, the vast Sony research and engineering facilities, among the most sophisticated in the world. Second, a commitment to a "total system technology" in the design of all our products. And third, a commitment to translating this approach into instruments for the home that incorporate advanced technology at a cost within the reach of the user.
All vital component circuit elements are manufactured in our own plants, according to exacting tolerances and stringent quality control. Our concern with quality extends to human engineering and painstaking attention to detail, including precision finishing of controls. With every Sony component, there's a touch of luxury and a special degree of convenience.
When it comes to testing component performance, the Sony standard is also high. And so are performance specifications, even though we quote them conservatively. In fact it's hard to find a Sony component that won't surpass its rated performance specs.
Specifications
Amplifier Section
Continuous RMS Power Output (less than 0,07% T.H.D., both channels driven simultaneously)
At 20 Hz to 20 kHz : 85 +85 watts at 8 Ω
Power Bandwidth (IHF): 10 Hz - 35 kHz
Damping Factor: 40 at 1 kHz, 8 Ω
Total Harmonic Distortion
Less than 0,07% at rated output
Less than 0,05% at 1 W output
Intermodulation Distortions (60 Hz : 7 kHz = 4 : 1)
Less than 0,07% at rated output
Less than 0,05% at 1 W output
Residual Noise: less than 0,3 mV (A network)
Inputs Sensitivity/Impedance
Phono MM : 2,5 mV/50 k Ω (S/N 80 dB, A Weighting Network)
Aux, Tape 1 - 2 : 150 mV/100 k Ω (S/N 100 dB, A Weighting Network)
Output Voltage/Impedance
Rec Out 1, 2 : 150 mV/4,7 k Ω
Headphones Output: 8 Ω - 10 k Ω
Speaker Output: 8 Ω - 16 Ω
Frequency Response:
Phono 1, 2 : RIAA equalization curve ±0,5 dB
Auz, Tape 1 - 2 : 5 Hz - 50 kHz +0 -2 dB
Tone Controls
Bass ±10 dB at 100 Hz
Treble ±10 dB at 10 kHz
Filters
High : 6 dB/oct. Above 9 kHz
Low : 6 dB/oct. Below 50 Hz
Loudness Control (att. 30 dB)
+10 dB at 50 Hz
+3 dB at 10 kHz
FM Tuner Section
Tuning Range: 87,5 - 108 MHz
Antenna: 300 Ω (balanced), 75 Ω (unbalanced)
Intermediate Frequency: 10,7 MHz
Sensitivity at 50 dB quieting
Mono : 2,8 µV (14,5 dBf)
Stereo : 40 µV (37,3 dBf)
Usable Sensitivity: 1,7 µV (9,8 dBf, IHF)
Limiting Threshold: 1 µV
Signal-to-Noise Ratio
Mono : 76 dB
Stereo : 70 dB
Total Harmonic Distortion
Mono : 0,08% at 1 kHz
Stereo : 0,25% at 1 kHz
Intermodulation Distortion
Mono : 0,08%
Stereo : 0,25%
Separation at 1 kHz : 48 dB
Frequency Response: 30 Hz - 15 kHz +0,2 -1,5 dB
Selectivity: 75 dB at 400 kHz
Capture Ratio: 1,0 dB
AM Suppression Ratio: 60 dB
Image Response Ratio: 80 dB
IF Response ratio: 100 dB
Spurious Response Ratio: 100 dB
RF Intermodulation: 70 dB
Subcarrier Product Ratio: 60 dB
SCA Rejection Ratio: 60 dB
Muting Threshold: approx 5 µV
AM Tuner Section
Tuning Range: 530 kHz - 1605 kHz
Antenna: Built-in ferrite-bar antenna
External antenna terminal
Intermediate Frequency: 468 kHz
Uasbla Sensitivity:
200 µV/m (built0in antenna)
100 µV/m (external antenna at 1,000 kHz)
Signal-to-Noise Ratio : 50 dB at 50 mV/m
T.H.D. : 0,5% at 50 mV/m, 400 Hz
Selectivity: 40 dB at 10 kHz
Image Response Ratio: 40 dB at 1,000 kHz
IF Response Ratio: 40 dB at 1,000 kHz
General
Power Requirements: 110,120, 220 or 240 V AC Adjustable 50/60 Hz
Power Consumption: 135 W (US model), 430 500 W (E model- UK)
Dimensions (W x H x D): 525 x 195 x 450 mm (20-1/2" x 7-1/2" x 17-3/4")
Weight Net : 20,2 kg (44 lbs 1 oz)
Nessun commento:
Posta un commento