AUTO/Standard Turntable
The 1226 is likely to become known as Dual's "best buy" automatic. It shares all of Dual's standard features with the higher priced Duals, plus such refinements as the rotating single=play spindle. The platter of the 1226 is a one-piece die-casting that weighs a full four pounds. It is driven by a high torque motor which brings the platter to full speed in less than a half revolution and maintains speed within 0,1% despite wide variations in line voltage. Tonearm pivots with special low-friction bearings assure flawless tracking at as low as 0,75 gram
Specifications
Drive: 4-pole Dual synchronous motor with vertically adjustable drive pulley
Platter: Non-magnetic
Platter Weight/Diameter: 1,45 kg or 1,8 kg/270 mm
Platter Speed: 33-1/3 and 45 rpm
Automatic tonearm set-down coupled to speed selection
Pitch Control Variation: Adjustment range of approx. 1 semitone (6%) at all both platter speeds
Wow and Flutter (according to DiN 45 500):
Less than ±0,12% with 1,8 kg platter
Less than ±0.15% with 1,45 kg platter
Rumble:(according to DIN 45 500)
Unweighted: less than 38 dB
Weighted : ,57 dB
Tonearm : Torsion-resistant tubular aluminium tonearm in self-adjusting pivot bearing
Tonearm bearing Friction (related to stylus tip):
Vertical : less than 0,01 gram
Horizontal : less than 0,04 gram
Stylus Pressure: from 0 to 5 grams infinitely variable, operable from 0,5 gram stylus pressure up
Cartridge Holder: removable, accepting any cartridges with 1/2" ,mounting and a weight from 2 to 10 grams (including mounting hardware)
Power Supply: 110 - 130 V and 220 - 240 V, AC 50/60 Hz
Power Consumption: less than 10 watts
Current Drain
64 mA approx. At 220 V , 50 cycle
115 mA approx. At 110 V, 60 cycle
Dimensions (W x H x D): 13" x 5" x 10-3/4"
Weight: 13 lbs
No comments:
Post a Comment