Features
Tandberg TR 200
Specifications
better than DIN standard 45500
Pre-selection
of up to 6 FM stations.
Interstation
noise muting
Pre-amplifier
for record players with magnetic pickup
Front jack
for stereo headphones
FM Tuner
The Tandberg
FM Stereo receiver TR-200 is provided with a sophisticated FM tuner that
permits pre-selection of up to 6 FM stations. Black dial remains dark until
power is turned on, then lights up in crisp contrast to provide pleasant, easy
tuning. Muting effectively suppresses interstation noise during tuning.
Available with decoder for stereo FM reception.
Stereo Power
Amplifier
High power
output (2 x 20 Watts RMS and 2 x 30 Watts music power). RIAA equalized
pre-amplifier for record player with magnetic pickup. Loudness compensation
switch. Inputs for rocord player, tape deck and an extra program source, thus
providing a wide versatility. The TR-200 is ideal as the hub of your Tandberg
high fidelity stereo system. TR-200 is
housed in a stylish cabinet available in walnut, teak, rosewood or oak.
Specifications
Nominal
Power Output (1% THD at 1 kHz, DIN):
2 x 20
Watts RMS into 4 Ω
2 x 15
Watts RMS into 8 Ω
Music
Power: 2 x 30 Watts into 4 Ω
Harmonic
Distortion: 0,25% at power output 1 dB
below nominal value and lower
Intermodulation
Distortion: 1%
Damping
Factor: 15 at 4 Ω; 30 at 8 Ω
Power
Bandwidth: 20 - 35,000 Hz (DIN)
Frequency
Response: 20 - 40,000 Hz (linear inputs,
DIN)
Treble
Control: +14 dB, -15 dB at 10,000 Hz
Loudness: =3,5 dB at 10,000 Hz
Bass
Control: +16 dB, -16 dB at 50 Hz
Loudness: +11 dB at 50 Hz
Channel
Separation: 43 dB at 1000 Hz (DIN)
Signal/Noise
Ratio (DIN, reference 50 mW at nominal input signal, peak value):
Tape : 52 dB
Extra : 52
dB
Phono Magnetic and Ceramic: 52 dB
Sensitivity
(nominal power output at 1 kHz):
Tape : 250mV
Extra : 100
mV
Phono
Magnetic : 2,3 mV
Phono
Ceramic : 70 mV
FM Section
Frequency
Band: 87,5 - 108 MHz
Sensitivity
at 26 dB S/N, DIN:
1 µV
at 75 Ω;
2 µV
at 300 Ω
Sensitivity
at 30 dB S/N , IHF:
2 µV
at 300 Ω
Signal/Noise
Ratio (at 1 mV antenna voltage):
61 dB :
Unweighted DIN
70 dB :
Weighted DIN
68 dB :
Unweighted IHF
Harmonic
Distortion:
0,5%
DIN; 1% IHF
IF
Rejection: 100 dB IHF
Image
Frequency rejection: 70 dB IHF
IF
Bandwidth: 210 kHz (6 dB)
Limiting
(-3 dB): 3 µV at 75 Ω
Muting
Thereshold: 5 µV at 75 Ω
Capture
Ratio: 1,8 dB
General
Power
Requirements: Selector for 115/220/240 V
AC, either 50 or 60 Hz
Power
Consumption: 15 - 100 Watts
Dimensions
(W x H x D): 430 x 87 x 243 mm (16-7/8" x
3-7/16" x 9-5/8")
Weight: 5 kg
(11lbs)