Time and a bit of
genius make the difference. It wasn't easy to create the world's finest DC
receiver. It look Time. A great deal of it. For research. For development. For
testing. And it also a bit of genius - kind of genius that Sansui engineers are
world famous for. But we at Sansui were determined. And we Succeeded. So now
there is a patent pending on Sansui's unique new DC amplifier circuitry.
The Sansui G-6000 DC
receiver, like Sansui's entire G-line of DC receivers, incorporates this unique
technology it delivers music reproduction so superb you will actually hear the
difference. With Sansui's DC amplifier circuity you get better low frequency
response. It extends all the way down to zero Hz (DC), from main-in. That's one
reason it's called a DC receiver. With Sansui's DC amplifier circuitry you get
better high frequency response. It goes all the way up to 200,000 Hz, from
main-in. Just try to find another receiver with frequency response this wide.
With
Sansui's DC amplifier circuitry you also get fuller and faster response to
musical transients. This is measured in slew rate and rise time. And the slew
rate and rise time figures of the Sansui G-6000 are far better than those of
any competitive models. And with Sansui's DC amplifier circuitry there is
virtually no distortion. While eliminating the capacitors, we've solved the
time delay problem that causes transient intermodulation distortion (TIM). And total harmonic distortion is a mere 0,03%
at full rated power: 65 watts per channel,min. RMS, both channels driven
into 8 ohms from 20-20,000 Hz.
The Sansui G-6000 DC receiver is much more than
its extraordinary amplifier circuitry. It is also a superb FM section, with
excellent sensitivity, selectivity and signal-to-noise ratio, virtually without
distortion. The G-6000 also gives you high-technology protection circuitry that
keeps both your speakers and receiver safe, always it offers perfectly
positioned and highly accurate power, tuning and signal meters. And human
engineering, for greatest easy-of-operation. The G-6000 is also elegantly
styled with a beautiful simulated walnut grain finish.
Specifications
Audio Section
Power Output (min.
RMS, both channel driven, 20-20,000 Hz, no more than 0,03% T.H.D.): 65
watts per channel into 8 ohms
Load Impedance:
8 ohms
Total
Harmonic Distortion : less
than 0,03% at or below rated min. RMS power output
Intermodulation
Distortion (70 Hz : 7 kHz = 4 : 1
SMPTE method): less than 0,03% at rated power output
Frequency
Response ( Overall from AUX, at 1 watt): 5 Hz to 50,000 Hz, +0,2 dB, -2,0 dB
RIAA Curve Deviation
(Phono, 20 Hz - 20 kHz): +0,2 dB, -0,2 dB
Damping Factor (1
kHz, both channel driven): 30 into 8 ohms
Input Sensitivity/
Impedance:
Phono
1 and 2 : 2,5 mV/47 k Ω (max.
input capability : 220 mV at 1 kHz, less than 0,03% T.H.D.)
Mic
: 6 mV/10 k Ω
Aux,
Tape 1 and 2 : 150 mV/47 k Ω
Output Level (at 1
kHz):
Tape 1, 2 Rec (Pin
jacks) : 150 mV
Tape 2 Rec/Play (DIN
socket) : 43 mV
Hum and Noise
(short-circuit, A-network):
Phono 1 and 2 :
78 dB
Aux, Tape 1 and 2 :
65 dB
Controls
Bass : ±10 dB
at 50 Hz
Trebele : ±10
dB at 10 kHz
Susbsonic Filter:
-3 dB at 16 kHz (6 dB/oct)
High Filter :
-3 dB at 3 kHz (6 dB/oct)
Loudness (Volume
control -30 dB position): 8 dB at 50 Hz ; 6 db at 10 kHz
Audio Muting:
-20 dB
FM Tuner Section
Tuning Range:
88 to 108 MHz
Usable Sensitivity:
Mono
[IHF/DIN]: 10,3 dBf (1,8 µV) / 1,0 µV
Stereo IHF :
17 dBf
50 dB Quieting Sensitivity:
Mono : 14 dBf
Stereo : 36
dBf
Signal-to-Noise Ratio
(at 65 dBf):
Mono : 72 dB
Stereo : 68 dB
Distortion (at 65
dBf) Mono :
at 100 Hz :
less than 0,15%
at 1 kHz :
less than 0,13%
at 6 kHz :
less than 0,25%
Distortion (at 65
dBf) Stereo :
at 100 Hz :
less than 0,25%
at 1 kHz :
less than 0,18%
at 6 kHz :
less than 0,25%
Alternate Channel
Selectivity (at 400 khz): 75 dB
Capture Ratio:
1,0 dB
Image Response
Ratio: 70 dB
Spurious Response
Ratio: 90 dB
IF Response Ratio:
95 dB
Stereo Separation:
35 dB at 100 Hz
42 dB at 1 kHz
30 dB at 10 kHz
25 dB from 30 to
15,000 Hz
Frequency Response:
30 to 15,000 Hz
Antenna
Input Impedance: 300 Ω (balanced);
75 Ω (unbalanced)
AM Tuner Section
Tuning Range:
530 to 1,600 kHz
Usable Sensitivity
(bar antenna): 50 dB/m (300 µV/m)
Selectivity (±10
kHz): 35 dB
Signal-to-Noise
Ratio: 46 dB
Distortion (at 30%
Modulation, 80 dB/m): less than 0,5%
General Section
Power Requirements:
100, 120, 220, 240 V, 50/60 Hz
Power
Consumption: 310 watts, 380 VAC (rated)
Dimensions (W x H x
D): 505 x 187 x 409 mm (19-15/16" x 7-7/16" x 16-1/8")
Weight:
17,5 kg (38,6 lbs) net