Receiver
System Control Center with AV remote control and computer-controlled S.E.A.
graphic equalizer
Features
CSRP
improved, with factory-preset values added to the comprehensive display
facility; the user can see the settings and use it more easily.
With this,
the optimum values of the settings of volume, balance, loudness, SEA, surround,
etc, for each source can be stored in memory and recalled immediately while the
settings will be shown on the FL display in sequence, whenever the
corresponding source is selected. As factory-preset values for each source are
stored in the memories of these receivers, these can be recalled when the
receivers are switched on for the first time. Therefore, these values can be
used as they are as well as modified to the user's preference. In addition, as
the remote control units provided with most receivers incorporate a convenient
CSRP display, you can check the values and perform adjustment without leaving
your listening position.
CCS - COMPU
Link Communication System Interactive.
This CCS
system gives further interactive information to the JVC-exclusive COMPU LINK
system, by indicating the current source or operation mode you've commanded,,
or volume up/down, even the station name and SEA pattern recalled.
Five
programmed and five user preset equalization patterns
The graphic
equalizer not only allows the user to create five custom equalization patterns and store them in memory for later
recall but also lets the user call up one of five pre-programmed equalization
patterns; heavy, Clear, Soft, Movie and Vocal.
SEA
equalization pattern name memory/indication
Together
with the five user-programmable equalizer patterns, top-end receivers have a
pattern name input, and display capability. In the same way as that for station
names, up to five or four (RX-503) characters or numerals can be stored
in memory.
40 FM/AM
random station preset memory
All JVC
receivers include a computer-controlled digital synthesizer tuner featuring
preset memory of up to 40 broadcast stations for FM and AM randomly.
This feature
lets the user to preset almost any FM or AM station to be listened to, for
immediate pushbutton recall.
Other
Features on JVC receivers
Station name
memory with alphanumeric display
Auto memory
functions
Preset scan
function
Sound
selector
Specifications
Amplifier
Section
Output Power
(2-channel operation): 2 x 80 watts RMS
(8 Ω, 20 Hz - 20khz, 0,03% T.H.D.)
Intermodulation
Distortion: 0,03% at 80 watts
Input
Sensitivity/Impedance:
Phono : 2,5 mV/47 k Ω
Tape 1 Play
: 200 mV/47 k Ω
Tape 2, CD,
Video : 200 mV/47 k Ω
Recording
Output level: 200 mV
Frequency
response:
Phono (RIAA
eq.) : 20 Hz - 20 kHz ±0,5 dB
Tape 1 Play
: 10 Hz - 50 kHz ±1 dB
Tape 2, CD,
Video : 10 Hz - 50 kHz ±1 dB
Signal-to-Noise
ratio:
Phono : 71 dB ('66 IHF); 78 ('78 IHF, Rec Out)
Tape 1 Play
: 91 dB ('66 IHF); 85 dB ('78 dB)
Tape 2, CD,
Video : 91 dB ('66 IHF); 85 dB ('78 dB)
S.E.A.
Section
Center
Frequencies: 63 Hz. 160 Hz, 400 Hz, 1
kHz; 2 ,5 kHz; 6,3 kHz; 16 khz
Control
range: ±10 dB
FM Tuner
Section (IHF)
Tuning
Range: 87,5 MHz - 108 MHz
Usable
Sensitivity [mono]: 10,8 dBf (0,95 µV/
75 Ω)
50 dB
Quieting Sensitivity :
Mono : 16,3 dBf
(1,8 µV /75 Ω)
Stereo
: 38,3 dBf (22,5 µV/75 Ω)
Signal-to-Noise
Ratio (IHF-A net, 85 dBf):
Mono : 80 dB
Stereo
: 73 dB
Total
Harmonic Distortion (1 kHz):
Mono : 0,15%
Stereo
: 0,2%
Frequency
Respponse: 30 Hz - 15 kHz ; +0,5 dB -3
dB
Capture
ratio (85 dBf): 1,5 dB
Alternate
Channel Selectivity: 60 dB (±400 kHz)
IF Response
Ratio: 85 dB (at 98 MHz)
Stereo
Separation: 40 dB (at 1 kHz)
AM Tuner
Section
Tuning
Range: 530 kHz - 1710 kHz
Sensitivity: 30 µV (external); 300 µV /m (loop antenna)
Signal-to-Noise
ratio: 50 dB (100 mV/m)
Selectivity: 25 dB (±10 kHz)
Image
response Ratio: 40 dB
IF Response
Ratio: 60 dB
Total
Harmonic Distortion: 0,5% (100 mV/m)
General
Power
Requirements
: AC 120 V or 230 V 50/60 Hz
Consumption
: 290 watts, 380 VA
Dimensions
(W x H x D): 435 x 125 x 330 mm
(17-3/16" x 4-15/16" x 13")
Weight: 8 kg (17,7 lbs)
Remote
Control : RM-SR503U