DC Stereo
receiver with Digital Quartz Synthesiser Tuning
Now Aiwa
proudly introduces an exceptional high fidelity receiver designed to make
tuning faster, easier and more accurate than ever; the revolutionary new
AX-7800. with the same quartz locked digital-synthosized tuning system utilized
on the most sophisticated and expensive FM tuners available today.
Now
perfect tuning is as simple as pressing a button There's no more fumbling or
fidgeting with tuning knobs, dials and center tuning meters. The new Aiwa
AX-7800 simply doesn't have any.
Instead,
it provides an instant digital readout that's perfectly tuned to the actual
station frequency being received.
Drift is
impossible. Because Aiwa's quartz crystal oscillator locks instantly and
precisely into the center of each succeeding station's assigned frequency. Now
when you tune the Aiwa AX-7800, you stay tuned. With unerring accuracy that
even separates weaker stations from their stronger neighbors. Something no
conventional receiver with AFC can do.
Aiwa's
new AX-7800 is loaded with features; like memory Tuning that lets you preset up
to 6 FM and 6 AM stations. Like a highly visible 9-point LED peak power bar
graph. Like independent bass and treble frequency turnover controls.
And the
AX-7800's DC-power amplifier gives you 60 Watts per channel RMS at 8 ohms from
20 Hz to 20 kHz, with no more than 0,05% T.H.D.
Right
now, almost no receivers have all these advanced features.
Features:
Quartz
PLL synthesizer tuning
Automatic
tuning
Manual
scan selection
Auto
search hold tuning
Direct
selector key
DC
amplifier design means optimum sound quality at all frequencies
By the
use of classic DC design in the power amplifier section, deterioration of
low-frequency sound components due to phase shift is largely avoided, giving
the AX-7800 superbly flat reproduction characteristics all the way down to DC
(0Hz). Total Harmonic Distortion is kept to a completely inaudible 0,05% from
20 to 20,000 Hz at rated output, and the 3-stage differential amplifier circuit
also assures superior signal-to-noise performance from tuner, turntable orother
sources.
High
performance equalizer amplifier.
Employing
a newly developed plus-minus split power supply IC, the dual FET differential
amplifier used for phono cartridge reproduction assures close adherence to the
RIAA reference curve, as well as a high signal/noise ratio of 80 dB. The 200 mV
maximum phono input provides dynamic margin with any type of high quality MM
cartridge.
Specifications
FM Tuner
Section
usable Sensitivity:
Mono
: 10,8 dBf (1,9 µV)
Stereo :
17,2 dBf (4 µV)
50 dB
Quieting Sensitivity:
Mono
: 17,2 dBf (4 µV)
Stereo
: 36,0 dBf (35 µV)
Signal-to-Noise
ratio:
Mono
: 75 dB
Stereo
: 70 dB
Capture
Ratio: 1,5 dB
Alternate
Channel Selectivity: 70 dB (±400 kHz)
Image
Rejection: 75 dB
IF
Rejection: 90 dB
Spurious
Rejection: 100 dB
AM
Suppression: 55 dB
Total
Harmonic Distortion
Mono
: 0,4% (at 1 kHz)
Stereo
: 0,5 5 (at 1 kHz)
Frequency
Response: 30 - 15,000 Hz (+0,5 -2 dB)
Stereo
Separation: 4 dB at 1,000 Hz
Subcarrier
Suppression : 57 dB
Antenna
Terminals: 300 Ω (balanced), 75 Ω
(unbalabced)
AM Tuner
Section
Sensitivity
(External antenna)
3 Band
Type : 30 µV
2 band
Type : 25 µV
Signal-to-Noise
Ratio: 55 dB
Selectivity: 30 dB
Image
Rejection: 50 dB (at 1,000 Hz)
IF
Rejection: 35 dB (at 1,000 Hz)
Power
Amplifier Section
Continuous
power Output: 60 W x 2 (20 Hz - 20 kHz,
T.H.D. 0,05%)
Total
Harmonic Distortion: 0,05% (at effective
power output 8 Ω)
IM
Distortion: 0,05%
Damping
Factor: 50 (8 Ω)
Residual
Noise: 0,5 mV 98 Ω)
Preamplifier
Section
Input
Sensitivity/Impedance
Phono 1
: 2,5 mV / 47 k Ω
Aux 1
: 150 mV / 47 k Ω
Tape 1
: 150 mV / 47 k Ω
Phono
Overload: 200 mV 91 kHz, THD0,1%)
Frequency
Response:
Phono
: 30 Hz - 15 kHz ±0,5 dB
Aux, tape
: 10 Hz - 50 kHz +1 -3 dB
Tone
Control Range
Bass
: ±6 dB at 100 Hz (Turnover Frequency
200 Hz); ±9 dB at 100 Hz (Turnover Frequency 400 Hz)
Treble
: ± 9 dB at 10 kHz (Turnover Frequency
2,5 kHz); ±6 dB (Turnover Frequency 5 kHz)
Loudness
Control: 9,5 dB (100 Hz); 12 dB (10khz)
Signal-to-Noise
Ratio:
Phono
: 80 dB
Aux, Tape
Input: 100 dB
Power
Supply: 120, 220, 240 V; 50/60 Hz
Power
Consumption: 160 W
Dimensions
(W x H x D): 500 x 120 x 440 mm
(19-11/16" x 4-3/4" x 17-3/8")
Weight: 10,5 kg (23,1 lbs)