Advanced, High Power
AM/FM Stereo Receiver with Tonal Quality-Oriented Design Features.
For a
practically-prieced integrated receiver, Pioneer's SX-750 delivers an
astonishing amount of state-of-the-art. Perfection. Conventionally, receivers
have been considered inferior in terms of performance to integrated amplifiers
and independent tuners. But the SX-750 is bound to after this convention. Its
pre-amplifier, power amplifier and tuner sections give first-rate performance
specifications, the equal in many respects to separate components.
There is an
abundance of power: continuous power output of 50 watts per channel min. RMS at
8 ohms, from 20 to 20,000 Hz with no more than 0,1% Total Harmonic Distortion.
Other design features contribute to the unit's overall stability and
sensitivity. The input/output terminals and circuits of the pre-amplifier/tuner
sections are laid out on one large printed circuit board, a process that
eliminates shielded input cords and enhances overall tonal quality. The front
end uses a dual gate MOS type FET and a 4-gang variable capacvitor for its high
sensitivity and selectivity. The IF section combines up-to-the-minute circuits
and differential amplifier ICs for its high signal/noise ratio and low
distortion.
The SX-750 by
Pionner: innovative, attractive, value-packed - another model of efficiency in
receiver design.
Amplifier Section
Continuous Power
Output (both channels driven, 20-20,000 Hz)
50 watts per channel
at 8 ohms
60 watts per channel
at 4 ohms
Total Harmonic
Distortion (20-20,000 Hz, from Aux)
Continuous Rated
Power Output : No more than 0,1%
25 watts per channel power output (8 Ω ) : no more than 0,05%
1 watt per channel power output (8 Ω ) : no more than 0,05%
Intermodulation
Distortion (50 Hz :7 kHz =4:1, from Aux)
Continuous Rated
Power Output : No more than 0,1%
25 watts per channel power output (8 Ω ) : no more than 0,05%
1 watt per channel power output (8 Ω ) : no more than 0,05%
Damping Factor (30
Hz - 20 kHz) : 30
Input
Sensitivity/Impedance:
Phono : 2,5 mV/50 k Ω
MIC : 5 mV/50 k Ω
Aux : 150 mV/50 k Ω
Tape Play 1, 2 : 150 mV/50 k Ω
Phono Overload level
(T.H.D. 0,1%): 200 mV (1 kHz)
Output
Level/Impedance:
Tape rec 1, 2 : 150 mV
Tape Rec 2 (DIN) : 30 mV/80 k
Ω
Speaker : A, B, A+B
Headphones: low impedance
Frequency Response
Phono (RIAA eq.)
: 30 Hz - 15,000 Hz ±0,2 dB
Aux, Tape Play
: 10 Hz - 50,000 Hz +0 -1 dB
Tone Control
Bass : +8 dB, -7 dB at 100 Hz
Treble : +9 dB, -7 dB at 10 kHz
Filter High : 6 kHz (6 dB/oct)
Loudness Contour
(vol. Set at -40 dB ): +6 dB at 100 Hz ,
+3 dB at 10 kHz
Hum and Noise (IHF,
short circuit, A network, rated power)
Phono : 70 dB
Aux, Tape : 90 dB
FM Tuner Section
Usable Sensitivity
Mono : 10,7 dBf (1,9 µV)
Stereo : 19,0 dBf (9,8 µV)
50 dB Quieting
Sensitivity
Mono : 17,2 dBf (4,0 µV)
Stereo : 39,2 dBf (50 µV)
Signal-to-Noise
Ratio at 65 dBf
Mono : 72 dB
Stereo : 67 dB
Distortion at 65 dBf
MONO:
0,15% at 100 Hz
0,15% at 1 kHz
0,4% at 6 kHz
Distortion at 65 dBf
STEREO:
0,3% at 100 Hz
0,3% at 1 kHz
0,4% at 6 kHz
Frequency
Response: 30 Hz - 15,000 Hz +0,2 -2,0 dB
Capture ratio: 1,0 dB
Alternate Channel
Selectivity: 80 dB
Spurious Response
Ratio: 90 dB
Image Response
ratio: 80 dB
IF Response
Ratio: 100 dB
AM Suppression
ratio: 55 dB
Muting
Threshold: 14 dBf (2,8 µV)
Stereo
Separation: 40 dB (1 kHz), 30 dB (30 Hz
- 15 kHz)
Subcarrier product
ratio: 62 dB
SCA Rejection
ratio: 62 dB
Antenna Input: 300 Ω (balanced), 75 Ω (unbalanced)
AM Tuner Section
Sensitivity
300 µV/m IHF,
Ferrite antenna
15 µV IHF, externa
antenna
Selectivity: 35 dB
Signal-to-Noise
Ratio: 50 dB
Image
Rejection: 40 dB
IF Rejection: 65 dB
Antenna: built-in Ferrite Loopstick antenna
Semiconductors: 42 Transistors; 40 Diodes; 7 ICs; 1 FET
Power
Requirement: 120 V, 220-240 V, 50/60 Hz
Power
Consumption: 160W, 350 W (max)
Dimensions (W x H x
D): 480 x 149 x 371 mm (18-7/8" x
5-7/8" x 14-5/8")
Weight (net): 13,7 kg (30 lb 2 oz)