The MA6300 is the latest integrated amplifier, rich with all the premium technologies that McIntosh is famous for including Power Assurance System and Silent Electromagnetic Switching. With 100 watts per channel into 8 ohms, and 160 watts per channel into 4 Ω loads, the MA6300 can effortlessly power virtually any speaker from one of seven source selections: CD 1 and 2, Tuner, Phono, Tape, TV, and DVD
Featured in the MA6300 are ThermalTrak™ output transitors that instantly and accurately monitor their operating temperature and adjust bias as needed, resulting in low distortion at all power levels without excess heat. The MA6300 runs cooler than many integrated amplifiers even at peak levels.
The glass front panel is comprised of the distinctive :blue eyes" output meters along with controls for Balance, Volume, Mute, Standby/On, Headphone and the seven Source Selection Buttons. The latest LED fiber-optic panel illumination is used. A turn on delay prevents pops or thumps generated in other equipment from causing annoying noises or damaging speakers.
Only McIntosh can combine two basic audio components into a single instrument and still retain traditional mcIntosh performance, quality and reliability. The MA6300 provides all of this in a more compact, space-saving configuration. Those considering a McIntosh system for the first time will find the MA6300 a very comfortable place to start.
Some MA6300 Performance Features :
Electronic Input Switching - Digital Logic integrated circuits drive Electromagnetic switches on all seven inputs and operating functions for reliable, noiseless, distortion free switching.
Balanced Input - Allows the connection of a source component using long cable lengths, without a loss in sound quality.
R-Core Power Transformer - A regulated power Supply and special R-Core power Transformer ensures stable noise free operation even when the AC power line varies
Power Guard - The patented McIntosh Power Guard circuit prevents the amplifier from being over driven into clipping with its harsh distorted sound that can also damage your valuable loudspeakers.
Sentry Monitor and Thermal Protection - McIntosh Sentry Monitor power output stage protection circuits ensure the MA6300 will have a long and trouble free operating life. Built-in thermal protection circuits guard against overheating.
Specifications:
Power Output:
100 watts into an 8 Ω (load is the minimum sine wave continuous average power output).
The output RMS voltage is 28,3V across 8 Ω
160 watts into a 4 Ω (load is the minimum sine wave continuous average power output). The output RMS voltage is 25,3V across 4 Ω
Output Load Impedance: 8 Ω and 4 Ω
Rated Power Band: 20 Hz to 20,000 Hz
Total Harmonic Distortion: 0.005% maximum harmonic distortion at any power level from 250 milliwatts to rated power,(20 Hz - 20,000 Hz)
Dynamic Headroom: 1,4 dB
Frequency Response:
20 Hz - 20,000 Hz (+0, -0.5 dB)
10 Hz - 100,000 Hz (+0, -3 dB)
Preamplifier Main Output: 1 V for rated input (8 V Maximum)
Sensitivity (for rated output)
High Level : 250 mV (unbalanced), 500 mV (balanced)
Phono : 2,5 mV
Power Amp In : 1 V
Signal To Noise Ratio (A-Weighted)
High Level : 97 dB below rated output
Phono : 90 dB below 10 mV input
Power Amplifier : 110 dB below rated output
Intermodulation Distortion: 0.005% maximum, if the instantaneous peak power output is rated power or less per channel with both channels operating for any combination of frequencies from 20 Hz to 20 kHz.
Wide Band Damping Factor: 200 (at 8 Ω); 100 (at 4 Ω)
Input Impedance:
High Level : 20 k Ω
Phono : 47 k Ω ; 65 pF
Power Amp In : 10 k Ω
Maximum Input Signal:
High Level : 8 V
Phono : 90 mV
Power Amplifier In : 8 V
Main Output Impedance: 50 Ω
Power Guard: less than 2% T.H.D. with up to 16 dB overdrive at 1,000Hz
Voltage Gain:
High Level to Tape Output : 0 dB
High Level to Main Output : 12 dB
Phono to Main Output : 52 dB
Power Requirements
100 Volts, 50/60 Hz (at 3.6 amps)
110 Volts, 50/60 Hz (at 3.6 amps)
120 Volts, 50/60 Hz (at 3.2 amps)
220 Volts, 50/60 Hz (at 1.8 amps)
230 Volts, 50/60 Hz (at 1.8 amps)
240 Volts, 50/60 Hz (at 1.8 amps)
Note: Refer to the rear panel of the MA6300 for the correct voltage.
Dimensions, including the Front Panel, Knobs and Cables (W x H x D): 445 x 194 x 559 mm (17-1/2" x 7-5/8" x 22")
Weight: 16,8 kg (37 pounds)