Stereo Receiver AA-1115
Outstanding performance is guaranteed from this elegantly designed slim high fidelity stereo receiver. Top grade circuitry, precise controls and multiple connections.
Quality Circuits for High Fidelity
A plus/minus power supply and differential semi-complementary OCL circuitry not only provides 15 watts per channel continous power output, minimum RMS at 8 ohms from 40 to 20,000 Hz with no more than 0,5% Total Harmonic Distortion, but also produces better phase characteristic and accounts for more low range frequency directivity. Top grade 3-stage direct coupled negative feedback equalizer circuit also in the amplifier section extends phono input, signal linearity to 110 mV (rms, 1 kHz) to assure wide dynamic range.
AA-1115 tuner section features PLL (Phase Locked Loop) MPX section to assure accurate and stable FM stereo separation of more than 40 dB, IC equipped FM-IF section features a built-in quadrature detector for excellent linearity and minimal distortion over an exceptionally wide frequency range and two-stage ceramic filter for better selectivity.
Elegant and Easy-to-Operate Design
The new lighting structure enables clear reading of linear dial scale and AM/FM tuning meter, and the enumerated bass, treble, balance and volume controls facilitate easy reference. Other features include a loudness switch for clearer low volume listening, a mode switch with FM muting circuit for quieter tuning, a tape monitor switch and push-button speaker switches for easier selection
Multiple Connections
Connections include Phono Jacks and two full speaker systems. Dubbing from a tape deck to a tape deck is possible using Aux and Tape Jacks. Tuning, preamplification and power amplification in one slim cabinet. Do them well with quality Akai receiver AA-1115.
Specifications
Power Output: 15 watts per channel (min. RMS, at 8 Ω , 40 - 20,000 Hz , with no more than 0,5% T.H.D.)
Power Bandwidth (IHF): 15 Hz to 40 kHz (T.H.D. 0,5% at 8 Ω )
Signal-to-Noise Ratio (IHF):
Phono : better than 75 dB at 8 Ω
Aux : better than 90 dB
Residual Noise: less than 0,8 mV at 8 Ω
Channel Separation (IHF):
Phono : better than 50 dB at 1 kHz
Damping Factor: more than 30 (1 kHz, 8 Ω )
Output:
Speakers : A, B (4 to 16 Ω ); A + B (8 to 16 Ω )
Headphones : 4 to 16 Ω
Input Sensitivity/Impedance:
Phono : 3 mV/47 k Ω
Aux : 150 mV/100 k Ω
Tape Monitor:
Input [PIN / DIN} : 150 mV/100 k Ω / 150 mV/100 k Ω
Output [PIN / DIN} : 150 mv/100 k Ω / 30 mv/180 k Ω
Frequency Response:
Phono (RIAA) : 30 Hz to 15 kHz ±1 dB
Aux, Tape, Monitor : 10 Hz to 70 kHz +0 -2 dB
Tone Control:
Bass : ±9 dB at 100 Hz
Treble : ±9 dB at 10 kHz
Loudness Control: +10 dB at 100 Hz; +5 dB at 10 kHz (volume control set at -30 dB)
FM Tuner Section
Frequency Range: 88 MHz to 108 MHz
Sensitivity(IHF): 1,9 µV
Capture Ratio: 1,3 dB
Selectivity (IHF): more than 60 dB
Image Rejection: more than 65 dB (at 98 MHz)
IF Rejection: more than 90 dB (at 98 MHz)
Spurious Rejection: more than 90 dB (at 98 MHz)
AM Suppression: 50 dB
Signal-to-Noise Ratio: 65 dB
T.H.D.
Mono : less than 0,3% (100% mod)
Stereo : less than 0,6% (100% mod)
Stereo Separation: more than 40 dB at 1 kHz
Subcarrier Suppression: more than 52 dB
AM Tuner Section
Frequency Range: 520 kHz to 1605 kHz
Sensitivity (IHF):
Bar Antenna : 180 µV/m
External Antenna ; 10 µV
Selectivity (IHF): more than 30 dB
Image Rejection: more than 65 dB at 1 kHz
IF rejection: more than 45 dB
Signal-to-Noise Ratio: more than 45 dB
Tuning Indicator Meter: FM Center Tuning/ AM Signal Strength Meter
Muting Level Control: On (stereo)/Off (monaural) Switch
Antenna Input Impedance: 300 Ω (balanced); 75 Ω (unbalanced)
Miscellaneous
Semiconductors: 25 Transistors; 10 Diodes; 1 FET; 4 ICs
Power Requirement: 110/220/240 V switchable, 50/60 Hz
Dimensions (W x H x D): 480 x 128 x 268 mm (18,9" x 4,8" x 10,6")
Weight: 5,8 kg (12,8 lbs)