AM/FM
Multiplex Stereo Tuner Amplifier
This
attractive solid state compact was created especially for the person who has
never owned a quality stereo system before. Attach a small set of speaker
systems to it and you're ready for rich FM stsreo reception, plus regular FM
and AM programs like you've never heard them before. The 200, despite its
compact size and moderate price, incorporates all on Sansui's sophisticated
audio know-how, such as an FET frontend for unparalleled FM sensitivity and
selectivity, and automatic FM stereo/mono switching. At your convenience, you
can start to add other components. A quality stereo turntable, stereo tape deck
or recorder, stereo headphones and other components. You can built the 200 into
a complete audio system. At 17 watts the Sansui 200 has enough power to fill
the average home without straining. Weighing only 13,2 lbs., it is lighter than
many conventional radios capable of receiving AM broadcasts only. If you've
thought you could never afford to move up into the world of professional stereo
before, we invite you to investigate the Sansui 200 more throughly. We think it
could change your mind completely.
Features
FET
Front-End
Silicon
Transistor Circuitry
Sepp. OTL
output Stage
FM Stereo
Separation
Automatic FM
stereo/Mono Switching
Sensitive
Ferrite Antenna
One-Touch
Antenna Terminals
Wide Tuning
Dial
Ground
Terminal
Double
Transistor Protection
Full System
Inputs and Outputs
Complete
Sound Control
AC Outlet
Operates on
8 Voltages
Specifications
Audio
Section
Music
Power Output (IHF): 17 W at 4 Ω; 14 at 8 Ω
Continuous
Power Output (each channel): 6,5/6,5 W
at 4 Ω; 5/5 W at 8 Ω
Total
Harmonic Distortion: less than 1% at
rated output
Power
Bandwidth (IHF): 30 to 25,000 Hz (at 8 Ω load)
Frequency
Response (at normal listening level):
Aux over all
: 25 to 30,000 Hz ±2 dB
Channel
Separation (at 1 kHz rated output):
Phono : better than 40 dB
Aux : better than 45 dB
Hum and
Noise (IHF):
Phono : better than 65 dB
Aux : better than 70 dB
Input
Sensitivity (at 1 kHz rated output):
Phono
: 3 mV/ 50 k Ω
Aux
: 180 mV/ 100 k Ω
Tape
Mon (PIN) : 180 mV/ 100 k Ω
Tape
recorder (DIN) : 180 mV/ 100 k Ω
Recording
Output:
Tape Rec
(PIN): 180 mV
Tape
Recorder (DIN): 30 mV
Load
Impedance: 4 to 16 Ω
Damping
Factor: 20 at 8 Ω load
Equalizer
Phono: RIAA, NF type
Tone
Controls:
Bass : ±10 dB at 50 Hz
Treble
: ±8 dB at 10 kHz
Loudness
Control (volume control at -30 dB): +8
dB at 50 Hz ; +3 dB at 10 kHz
Switches
Selector
: Phono; FM Auto; AM;
Aux
Tape Monitor
: Off, On
Mode : Stereo, Mono
Other
Special Features:
DIN
Connector for Tape Recorder, Direct Tape Monitor,Head Phone jack.
FM Tuner
Section
Tuning
Range: 88 to 108 MHz
Sensitivity:
20 dB
quieting : 2,5 µV
IHF : 3 µV
Harmonic
Distortion: less than 1%
Signal-to-Noise
ratio: better than 50 dB
Selectivity: better than 35 dB at 98 MHz
Capture
ratio (IHF): 3 dB
Image
Frequency Rejection: better than 45 dB
at 98 MHz
IF
Rejection: better than 65 dB at 98 MHz
Spurious
Response Rejection: better than 65 dB at
98 MHz
Spurious
Radiation: less than 34 dB
Antenna
Input Impedance: 300 Ω balanced
FM Stereo
Separation: better than 30 dB at 400 Hz
AM Tuner
Section
Tuning
Range: 535 to 1605 kHz
Sensitivity: 51 dB/m at 1 kHz (bar antenna)
Image
Frequency Rejection: better than 30 dB
at 1 kHz
IF
rejection: better than 45 dB
Selectivity: better than 20 dB
Other
Special Features: FM Linear Scale Dial;
Signal Strength Meter; Fly -wheel Tuning; AM ferrite Bar Antenna; FM Stereo
Auto; FM SCA Filter
Semiconductors: 29 Transistors; 1 FET; 2 Varistors; 14
Diodes.
Power
Requirement: 100,110,117,127,220,230,
240, 250 V 50/60 Hz
Power
Consumption: 45 VA (max signal)
Dimensions
(W x H x D): 15-7/8" x 4-9/16"
x 11-1/16"
Weight: 13,2 lbs