PARADIGM Mk II Series
DRIVE UNITS
DRIVE UNITS
MkII Series high-frequency drivers.
Features include: treated textile domes with less than 0,28 gm of moving mass, unique coupling faceplate chassis for wide-dispersion and maximally flat frequency response, high temperature voice-coils and ventilated aluminium formers. Ferro-fluid damped and cooled. Barium ferrite magnets. Replaceable diaphragm.
MkII Series bass/mid-frequency drivers.
Features include: high-pressure diecast aluminum chassis, co-polymer polypropylene cones, high-hysteressis progressively-damped synthetic butyl suspensions, high-temperature multi-layer voice-coils, kapton formers. Low distortion symmetrically focused-field magnetic assemblies. Barium ferrite magnets.
DIVIDING NETWORKS
Selected, close tolerance, high power components in multi-Butterworth configurations. Frequency and phase-corrected.
FINISH
Oak or Black Ash vinyl veneer.

DESIGN:
2-driver, 2-way bass reflex.Quasi-3rd order resistive port
CROSSOVER:2nd order electro/acoustic - 2,2 kHz
DRIVER COMPLEMENT:
One 25 mm (1") MkII/5, high-frequency driver
One 210 mm (8") MkII/5, bass/midrange driver
PERFORMANCE:
Low Frequency Extension; 32 Hz (DIN)
Frequency Response On Axis (0⁰); ± 2 dB from 57 Hz to 20 kHz
Frequency Response Off Axis (30⁰); ± 2 dB from 57 Hz to 15 kHz
Sensitivity-Room/Anechoic; 90 dB / 87 dB
Suitable Amplifier Power Range; 15 - 150 watts
Maximum Input Power; 100 watts
Nominal/Minimum Impedance; 8 ohms / 5 ohms
Racommended Stands; PREMIER w-40 (shown) or m-40
PHYSICAL:
Internal Volume; 32 litres (1,1 cuf)
Height; 61 cm (24")
Width; 27 cm (10 ½")
Depth; 30 cm (11 ½")
Weight; 28 kg (60 lbs) per pair
No comments:
Post a Comment