What is stereo?

There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.

H.H. Scott '59


The 11seMkII takes the performance of the 9seMkII a major step fyrther. This is accomplished by incorporating mineral-filled polypropylene bass/midrange drivers in a floor-standing system complete with its own spiked plinth.Wonderfully natural, open and detailed with deep, tight and powerful bass. Remarkably free from colouration. Excellent soundstage, image placement
and superb ability to capture the recorded acoustic space. High sensitivity and high power handling with exceptionally low distortion, especially at high sound pressure levels, give the 11sMkII excellent dynamic power capability.
The 11seMkII is an outstanding 2-way design that consistently outperforms considerably more expensive systems. Extraordinary performance and value.
3-driver, 2-way bass reflex. Quasi-3rd order resistive port
CROSSOVER: 3nd order electro/acoustic - 1,8 kHz
One 25 mm (1") MkII/5, high-frequency driver
Two 210 mm (8") MkII/5, bass/midrange driver
Low Frequency Extension; 30 Hz (DIN)
Frequency Response On Axis (0⁰); ± 2 dB from 50 Hz - 20 kHz
Frequency Response Off Axis (30⁰); ± 2 dB from 50 Hz to 15 kHz
Sensitivity-Room/Anechoic; 92 dB / 89 dB
Suitable Amplifier Power Range; 15 - 250 watts
Maximum Input Power; 160 watts
Nominal/Minimum Impedance; 6 ohms / 4 ohms
Racommended Stands; Comes with spiked isolation plinth.
Internal Volume; 74 litres (2,6 cuf)
Height; 101 cm (39 ¾")
Width; 30 cm (11 ¾")
Depth; 37 cm (14 ¼")
Weight; 55 kg (120 lbs) per pair

Nessun commento:

Posta un commento