What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





Kenwood KR-2600 Receiver

 Kenwood KR 2600 FM/AM Stereo receiver

A Pace-Setting and Superbly Crafted Receiver Achievement by kenwood Engineers.
Kenwood is pround to announce this new high fidelity receiver, latest product of the unique Kenwood combination of traditional quality and advanced engineering expertise. Kenwood engineers are specialists. Their sole concern is to make the highest quality of audio available to the greatest number of people. Always among the industry leaders, they have a number of impressive firsts to their credit. The KR-2600 benefits from their special know-how. Take a long, good look at the specifiaction figures. See the sleek and attractive design. Spin the flywheel tuning knob. Flick the switches. Everything shouts  High Quality.

Specifications
FM Tuner Section
Frequency Range:  88 MHz - 108 MHz
Usable Sensitivity (IHF):  2,5 µV
Quieting Slope: 
Mono :  4,5 µV (50 dB)
Stereo :  55 µV (50 dB)
Frequency Response:  20 Hz to 15,000 Hz +0 dB, -2 dB
Harmonic Distortion:
Mono :  0,3% (at 400 Hz, 100% modulation)
Stereo :  0,5% (at 400 Hz, 100% modulation)
Signal-to-Noise Ratio:
Mono :  70 dB at 1 mV input
Stereo :  64 dB
Image Rejection:   50 dB
Selectivity (IHF ALT channel):  50 dB DIN  ±300 kHz, 32 dB
IF Rejection:  85 dB
Spurious Signal Rejection:  75 dB
AM Suppression:  45 dB
Capture Ratio:  2,5 dB
Stereo Separation:  33 dB at 1 kHz ;  25 dB at 10 kHz
Sub Carrier Suppression:  40 dB
Antenna Impedance:  300 Ω balanced; 75 Ω unbalanced
AM Tuner Section
Usable Sensitivity (IHF):  25 µV
Signal-to-Noise Ratio:  48 dB at 1 mV input
Image Rjection:  45 dB
Selectivity (IHF):  25 dB
IF rejection:  33 dB
Antenna:  Buily-in ferrite bar antenna . External antenna terminal
Power Amplifier Section
RMS Power Output
Both Channel Driven:
15 watts x 2 into 8 Ω at 20 Hz to 20 kHz
18 watts x 2 into 8 Ω at 1 kHz
18 watts x 2 into 4 ohms at 1 kHz (DIN)
Each Channel Driven:
22 watts x 2 into 8 Ω at 1 kHz
28 watts x 2 into 4 Ω at 1 kHz
Dynamic Power Output:
52 watts into 8 Ω
58 watts into 4 Ω
Total Harmonic Distortion: 
0,8% at rated power into 8 Ω
0,1% at 1/2 rated power into 8 Ω at 1 kHz
Intermodulation Distortion (60 Hz :7 kHz = 4:1): 
0,8% at rated power into 8 Ω
0,2% at 1/2 rated power into 8 Ω
Power Bandwidth:  10 Hz to 70,000 Hz
Damping Factor:  30 at 8 Ω
Speaker Impednce:  accept 4 Ω to 16 Ω
Preamplifier Section
Input Sensitivity /Impedance:
Phono :  2,5 mV/50 k Ω
Aux :  150 mV/45 k Ω
Tape Play :  150 mV/45 k Ω
Maximum Input Voltage (RMS)
Phono :  140 mV (T.H.D. 0,8% at 1 kHz)
Signal-to-Noise Ratio (IHF A Curve):
Phono :  70 dB
Aux :  90 dB
Tape Play :  90 dB
Output Voltage/Impedance
Tape Rec (Pin) :  150 mV/ 100 Ω
Tape rec (DIN) :  30 mV/80 k Ω
Frequency response
Phono :  RIAA Standard curve ±0,8 dB
Aux, Tape Play :  20 Hz to 50,000 Hz ±1,5 dB
Tone Controls
Bass :  ±8 dB at 100 Hz
Treble :  ±8 dB at 10 kHz
Loudness Control (-30 dB) :  ±8 dB at 100 Hz; ±5 dB at 10 kHz
High Filter :  -10 dB at 10,000 Hz
General
Switches:
Speaker Selector :  A, B,  A + B
Input Selector:  AM - FM - PHONO - AUX
Mode :  Mono - Stereo
Function :  Hi Filter
Tape Monitor :  Play - Source
Others:  Loudness, Phone jack
AC Outlets:  Switched 1
Power
Supply :  110 - 120 - 220 - 240 V AC, 50/60 Hz
Consumption:  125 watts at full power; 15 watts at no signal
Dimensions (W x H x D):  438 x 135 x 300 mm (17-1/4" x 5-5/16" x 11-13/16")
Weight:  6,5 kg (14,3 lbs)


Nessun commento:

Posta un commento