What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





Kenwood KR-950B

Kenwood KR-950
Quartz Synthesizer Hi-Speed DC Receiver
Features:
Front panel MM/MC cartridge selection
Two-way tape dubbing LED power meters
Quartz PLL frequency synthesized tuner
Automatic seek tuning with High and Low sensitivity selector
6 FM and 6 AM memory presets

Specifications:
Audio Sections
Power Output:  80 W/ch min. RMS, both channels driven into 8 ohms, 20 Hz to 20 kHz with no more than 0,015% THD
Both Channels Driven ( into 8 Ω at 1 kHz):  85 W + 85 W
Dynamic Power Output (at 4 Ω):  250 W
Total Harmonic Distortion (20 Hz -20 kHz from Aux):
Rated power into 8 Ω :  0,015%
1 watt power into 8 Ω :  0,01%
Intermodulation Distortion (60 Hz :7 kHz = 4:1 SMPTE):
Rated power into 8 Ω :  0,01%
Damping Factor:  40 at 1 kHz, 8 Ω
Transist Response:
Rise Time :  2 µs
Slew Rate :  ±50 V/µs
Input Sensitivity/Impedance:
Phono MM :  2,5 mv/ 50 k Ω
Phono MC :  0,25 mv/100 Ω
Tuner,Aux,Tape Play :  150 mV/50 k Ω
Signal-to-Noise Ratio (A weighted):
Phono MM :  86 dB for 2,5 mV input
Phono MM :  92 dB for 5,0 mV input
Phono MC :  68 dB for 0,25 mV input
Tuner,Aux,Tape Play :  104 dB for 105 mV input
Phono Max. Input Level (at 1 kHz):
MM :  200 mV (RMS), THD0,01%
MC :  30 mV (RMS), THD0,1%
Frequency Response:
Phono RIAA Standard  Curve:  20 Hz to 20 kHz ±0,3 dB
Over All (Aux ->Spkr.):  DC Hz to 160 kHz +0 dB, -3 dB
Tone Control:
Bass :  ±8 dB at 100 Hz
Treble :  ±8 dB at 10 kHz
Filter:
Low :  6 dB/oct at 18 Hz
High :  6 dB/oct at 5 kHz
Loudness Control (Vol -30 dB):  +10 dB at 100 Hz
Output Level/Impedance:
Tape Rec Out (PIN):  150 mV/ 1 k Ω
FM Tuner Section
Usable Sensitivity:  10,8 dBf (1,9 µV)
50 dB Quieting Sensitivity:
Mono :  14,2 dBf (2,8 µV)
Stereo :  36,8 dBf (38 µV)
Signal-to-Noise Ratio at 65 dBf:
Mono :  80 dB
Stereo :  74 dB
Total Harmonic Distortion at 1 kHz:
Mono :  0,07%
Stereo :  0,08%
Frequency Response:  30 Hz to 15 kHz +0,5 dB -2 dB
Image rejection Ratio:  80 dB
Spurious Response ratio:  95 dB
IF Response Ratio:  95 dB
Alternate Channel Selectivity:  60 dB at ±400 kHz
AM Suppression Ratio:  60 dB
Stereo Separation:  50 dB at 1 kHz; 40 dB at 50 Hz to 10 kHz
Antenna Impedance: 
Balanced :  300 Ω
Unbalanced :  75 Ω
FM Frequency Range:  87,5 MHz - 108 MHz
AM Tuner Section
Usable Sensitivity:  10 µV (400 µV/m)
Signal-to-Noise Ratio:  48 dB
Image Rejection Ratio:  40 dB
Selectivity:  25 dB
General:
Power Consumption:  65 W (no signal); 3,5 A (UL and CSA); 450 W (IEC); 450 W (others)
AC Outlet:  Switched2, Unswitched 1
Dimensions (W x H x D):  480 x 142 x 350 mm (18-29/32" x 5-19/32" x 13-25/32")
Weight:  9,0 kg (19,8 lb) net

1 commento:

  1. Thanks for sharing, nice post!

    Giaonhan247 sẽ giúp bạn giải đáp thắc mắc đi mỹ nên mua gì hay du lịch sang đi hàn quốc nên mua gì hay đi đức nên mua gì hay giải đáp đi pháp nên mua gì cũng như đi úc nên mua gì làm quà.

    RispondiElimina