Sansui XR-Q11 turntable

What is stereo?

There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.

H.H. Scott '59

Sansui XR-Q11 turntable

Minicomputerized Turntable

Sansui's model XR-Q11 turntable features an internal minicomputer that can be programmed to play up to seven selections on a record side in any desired order. After programming the unit's operation is completely automatic from initial cueing to the final arm return and motor shut-off. Electronic sensors constantly monitor the operation to ensure smooth and accurate performance, and to protect the stylus and record. It has a "fail-safe" provision that shuts the turntable down and illuminates a waring indicator in the event of a malfunction. All controls are up front and outside the dust cover for convenience and added record protection. A dual-head magnetic sensing system measures platter speed by reading magnetic pulses. It has five times the accuracy of conventional systems, according to Sansui, and triggers a fast-acting quartz-servo speed correction system. Wow and flutter have been reduced to 0,015 percent, and Signal-to-Noise ratio is 78 dB.

The tonearm is a patent pending DOB unit which makes use of optimum pivot-point technology. The straight, low mass arm is pivoted at the exact point that minimizes vibration transfer. Dynamic balance is said to be nearly perfect. The DOB arm suspension and special high-density BMC (Bulk Molding Compound) turntable base form an effective barrier against acoustic feedback. Even more feedback isolation and protection is provided by mounting the motor and arm on a rigid cast-zinc subassembly within the turntable base.

Specifications:

Type: 2-speed direct drive

Speeds: 33-1/3 and 45 rpm

Platter: aluminum alloy die-cast

Diameter: 350 mm (13-3/4")

Weight: 1,7 kg (3,74 lbs(

Motor: DC Brushless servo type; Quartz servo

Wow and Flutter: less than 0,022% WRMS

(less than 0,015% WRMS, read out direct at the FG output)

Signal-to-Noise Ratio: better than 62 dB (IEC B);

Rumble: better than 78 dB (DIN B)

Tonearm: Statically balanced type

Toneran length : 245 mm (9-11/16")

Overhang : 16 mm (5/8")

Optimum Cartridge Weight : 4 - 10 g

Power Source: 120 V, 220 - 240 V, 50/60 Hz

Power Consumption: 33 W

Dimensions (W x H x D): 483 x 142 x 420 mm (19" x 6-5/8" x 16-9/16")

Weight: 12,5 kg (27,5 lbs) net

Cartridge model SV-101

Type : Dual magnet

Frequency Response: 10 - 20,000 Hz

Output Voltage: 2,5 mV per channel ( 1,000 Hz, 35,4 mm/sec)

Load Impedance: 47 k Ω

Tracking Force: 2 g

Stylus: 0,6 mil, diamond spherical (SN-101)

Pagine

What is stereo?