Yamaha claims this
model K-950 cassette deck "closes the gap" between cassette tapes and
discs, in terms of performance, while still providing the traditional benefits
of tape, including elimination of dirt problems and uninterrupted playback of
long selections. One reason for improved performance is the capability to play
metal tape. Wow and flutter rated at 0,025 perceent WRMS, results from use of
an independent two-motor drive system. This spec, it's pointed out, is
comparable to the drive stability of a quartz-locked turntable. Frequency
Response is 30 to 22,000 Hz, 3 dB, with metal tape.
The K-950 also
features a pure plasma process sendust head for better frequency response and
reduced dropout and modulation noise. The use of a core/coil design and silver
wires substantially lowers head impedance to provide improvend square-wave
response, improved linear phase response at high frequencies,, greater dynamic
range and better channel separation, according to Yamaha.
Other performance
and/or convenience features include; a fluorescent bar-graph peak meter to
facilitate home recording; IC logic controls; continuously adjustable bias
control; timer recording switch; subsonic and MPX filters. Dolby noise
reduction; a focus switch to extend high-end frequency response, or to improve
phase coherance.
Track
Configuration: 4-track 2-channel
Tape Speed: 4,8 cm/s ±1%
Wow and
Flutter: 0,028% WRMS
Rapid F.FWD/Rew:
75 sec. C-60 cassette
Motors
Capstan : FG servo DC motor
Reel : Governorless DC motor
Operation
Logic Controlled
Feather Touch Operation
Full Auto Shut-Off
System
Heads
2 head
Recording/Playback : pure &Plasma
process head
Erase : Ferrite head
Frequency Response
Rec/Pb
LH Tape ; 30 to 17,000 Hz ±3 dB
Cr02 Tape : 30 to 19,000 Hz ±3 dB
Metal Tape : 30 to 22,000 Hz ±3 dB
Input
Sensitivity.Impedance
Mic : 0,3 mV/5 k Ω
Line : 60 mV/50 k Ω
Output
Level/Impedance:
Line : 340 mV/50 k Ω
Phones : 5 mW/150 Ω (1 mW)
Variable Bias
Range: ±8%
Signal-to-Noise
Ratio [CrO₂]: better than 52 dB
Overall Distortion
LH Tape : less than 1%
CrO₂ Tape : less than 1,5%
Metal tape : less than 1%
Power Supplies; 120 V, 220 V - 240 V, Ac 50/60 Hz
Power
Consumption: 26 W
Dimensions (W x H x
D): 435 x 140 x 305 mm ( 17-1/8" x
5-1/2' x 12")
Weight: 8,8 kg ( 19,4 lbs)
Nessun commento:
Posta un commento