Friction-locked belt
driven L&R record level
Ganged output level
Timer control
function
Bias and
equalization selection
Dolby / MPX filter
on-off
Input selection
Record level meter
peak hold on-off
Record meter
auto/manual peak reading reset
Record level meter
brightness [hi/lo]
Counter memory
on-off and reset
An outstanding
feature of the Teac A-510 Mk II is a peak indicating bar-graph record level
indicator with both instantaneous and peak-hold modes. The peak-hold can be
programmed to automatically reset after a few seconds, or maintain its value
until manually reset. A pre-wired socket allows full-feature remote control
with a plug in remote controller. Unit can be timer started in either the
record or play mode. It has bias and equalization selectors for normal,
high-bias (chrome) and metal tapes and a Dolby noise reduction system. The Teac
A-510 MkII also has some useful taping controls; a record mute that can be used
while the tape is driving and a "flying start" record switch that
allows you to switch to the record mode while the tape is in the play mode.
There is also an end-of-tape-stop feature, memory reset counter and
timer-controlled record/play to provide maximum operator convenience.
Specifications
Track System:
4-track, 2-channel stereo
Heads: 2 heads,
Erase and Record/Playback
Tape Type: Compact Cassette C-60 and C-90
Tape Speed: 1,7/8 ips (4,76 cm/s)
Motor: FG servo controlled DC motor
Wow and
Flutter: 0,05%
Frequency Response:
Metal Tape : 30 - 18,000 Hz
CrO₂ Tape: 30 - 18,000 Hz
Normal Tape: 30 - 15,000 Hz
Signal-to-Noise
Ratio: 56 dB (3%T.H.D.)
Rewind/Fast Forward
Time: approx. 90 sec. C-60
Inputs:
Line 60 mV/50 k Ω
Microphones: 0,25 mV/-72 dB (200 Ω or more)
Outputs
Line: 0,3 V (load impedance of 50 k Ω or more)
Headphones
Jack: 8 Ω
Power
Requirement: 100/117/220/240 V AC 50/60
Hz
Power
Consumption: 29 W
Dimension (W x H x
D): 440 x 147 x 345 mm (17-5/16" x
5-13/16" x 13-9/16")
Weight: 9,5 kg (20-15/16 lbs)
No comments:
Post a Comment