Stereo Receiver Akai model AA-1040
Features:
Akai's engineers succeeded in designing the best cost performance receivers on the market with the AA-1000 series. The newest release of Akai's series, model AA-1040 features in Continuous Power Output, 40 watts per channel (both channel activated from 20 to 20,000 Hz with no more than 0,15% T.H.D. at 8 ohms load impedance)
Phase Locked Loop (P.L.L.) IC for FM MPX circuit together with Automatic Frequency Control {AFC) for perfect and stable FM reseption
Variable FM Muting Control for convenient FM tuning
Specifications
Amplifier Section
Continuous Power Output: 40 watts per channel , min. RMS, at 8 ohms from 20 Hz to 20 kHz, with no more than 0,15% T.H.D.
Power Bandwidth (IHF) : 7 Hz to 70,000 Hz / 8 Ω (Distortion within 0,15%)
Input Sensitivity/Impedance
Phono 1, 2 : 3 mV/47 k Ω
Tape 1, 2 : 150 mV/100 k Ω
Aux : 150 mV/100 k Ω
Signal-to-Noise Ratio (IHF)
Phono : better than 80 dB
Aux : better than 90 dB
Channel Separation (IHF):
Phono : better than 60 dB (at 1 kHz)
Equalizer Phono : RIAA ±1 dB
Tone Controls
Bass : ±10 dB at 100 Hz
Trebble : ±10 dB at 10 kHz
Loudness Contour: +10 dB at 100 Hz; +6 dB at 10 kHz (Volume control set at -30 dB position)
Filter:
High : -10 dB at 10 kHz
Low : -8 dB at 50 Hz
FM Tuner Section
Frequency Range: 88 MHz - 108 MHz
Sensitivity (IHF): 1,9 µV
Capture Ratio (IHF): 1,0 dB
Selectivity (IHF): better than 80 dB at 98 MHz
Signal-to-Noise Ratio : better than 75 dB
Image Rejection: better than 90 dB at 98 MHz
IF Rejection: better than 100 dB at 98 MHz
Spurious Rejection: better than 90 dB at 98 MHz
Harmonic Distortion
Mono : less than 0,15%
Stereo : less than 0,3%
FM Stereo Separation: better than 40 dB ( at 1 kHz)
FM Muting: Variable (3 µV to 300 µV) On-Off
Antenna Input: 300 Ω (balanced), 75 Ω (unbalanced)
AM Tuner Section
Frequency Range: 535 kHz to 1605 kHz
Sensitivity (IHF): 180 µV/m (Bar antenna); 8 µV (ext. Antenna)
Image Rejection: better than 55 dB at 1 kHz
IF Rejection: beter than 45 dB at 1 kHz
Selectivity (IHF): better than 45 dB at 1 kHz
AM Distortion: less than 0,6%
Signal-to-Noise Ratio: better than 50 dB
General Section
Semiconductors: 1 FET, 49 Transitors; 22 Diodes; 3 ICs
Power Requirements: 120 V, 220 V, 240 V 50/60 Hz
Dimensions (W x H x D): 480 x 155 x 390 mm (18,9" x 6,1" x 15,4")
Weight: 12,8 kg (28,2 lbs)
Nessun commento:
Posta un commento