PMA-540 Direct A, Real Drive Circuit - Integrated Amplifier
Non-switching power amplifier delivers 60 W + 60 W power output
Super equalizer amplifier provides a wide RIAA deviation from 20 Hz - 100 kHz ±0,2 dB
Real drive circuit reduces distortion during speaker drive by 1/50
Newly developed real time tone control circuit prevents deterioration in sound quality
Provided with A, B speaker system for individual On Off switch.
Specifications
Type: All stage direct DC servo circuit
Power Amplifier Section
Output Power: 65 W per channel min. RMS, both channels driven at 8 Ω from 20 Hz - 20 kHz, no more than 0,03% T.H.D.
Total Harmonic Distortion (20 Hz - 20 kHz): less than 0,009%
Intermodulation Distortion (60 Hz /7 kHz : 4/1 at rated output): less than 0,006%
Power Bandwidth (both channel driven): 4 Hz - 100 kHz (T.H.D. 0,1%)
Frequency Response (at 1 W output): 1,5 Hz - 250 kHz +0, -3 dB
Input Sensitivity/Impedance: 150 mV/ 40 k Ω
Output Impedance: 0,08 Ω (1 kHz)
Pre-Amp Section
Max. Output/Rated Output: 10 V / 150 mV
Input Sensitivity/Impedance:
Phono MM : 2,5 mV/50 k Ω
Phono MC : 0,25 mV/100 Ω
Tuner, Aux, Tape : 150 V/40 k Ω
RIAA Deviation: 20 Hz - 100 kHz ±0,2 dB (MM)
Signal-to-Noise Ratio (IHF-A):
Phono MM : 88 dB
Phono MC : 72 dB
Tuner, Aux, Tape : 106 dB
Tone Control:
Bass : ±8 dB at 100 Hz
Treble: ±8 dB at 10 kHz
Subsonic Filter: 18 Hz 6 dB/oct
Loudness Control:
Low: 100 Hz +7,5 dB
High : 10 kHz +5,5 dB
Power Requirements: AC 110 - 120 V, 220 - 240 V, 50/60 Hz
Power Consumption: 130 W (395 W)
Dimensions (W x H x D): 434 x 112 x 390 mm
Weight: 9,7 kg
Nessun commento:
Posta un commento