Denon DRA-350 receiver

What is stereo?

There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.

H.H. Scott '59

Denon DRA-350 receiver

AM/FM Stero Receiver Denon DRA-350

The Audiophile Receiver with the Performance of Separate Components

One listen and you'll agree; the DRA-350 combines the convenience of tuner/amplifier integration with the high level of performance you've to expect only from separate components

Specifications

Amplifier Section

Continuous Power Output : 36 watts per channel minimum RMS, both channel driven at 8 Ω from 20-20,000 Hz no more than 0,05% Total Harmonic Distortion

Power Bandwidth (IHF): 5 Hz - 40,000 Hz (T.H.D. 0,1% both channel driven at 8 Ω )

Total Harmonic Distortion (20 Hz to 20 kHz): 0,03% (-3 dB power into 8 Ω )

Damping Factor: more than 80 (at 1 kHz, 8 Ω )

Frequency Response:

Phono MM : 20 - 20,000 Hz ±0,5 dB (RIAA Standard Curve)rec Out

Tape, Video, DAD : 20 - 50,000 Hz ±1,5 dB

Input Sensitivity/Impedance

Phono MM : 2,5 mV/47 k Ω

Tape, Video, DAD : 150 mV/33 k Ω

Maximum Input Level (at 1 kHz)

Phono MM : 150 mV

Signal-to-Noise Ratio (IHF-A):

Phono MM : 5,0 mV (Input 86 dB)

Tape, Video, DAD : 95 dB

Tone Controls:

Bass : ±10 dB at 100 Hz

Treble : ±10 dB at 10 kHz

Loudness : Variable 50 Hz/10 kHz +10 dB/+5 dB

Subsonic Filter : 15 Hz -6 dB/oct

FM Tuner Section

Receiving Range: 87,5 - 108 MHz

Usable Sensitivity: 0,8 µV (9,3 dBf)

50 dB Quieting Sensitivity:

Mono : 1,8 µV (16,4 dBf)

Stereo : 23 µV (38,5 dBf)

Signal-to-Noise Ratio

Mono : 82 dB

Stereo : 80 dB

Total Harmonic Distortion

Mono : 0,07% at 1 kHz

Stereo : 0,12% at 1 kHz

Capture Ratio: 1,2 dB

Image Rejection: 45 dB

AM Suppression: 60 dB

Selectivity: 55 dB

Frequency Response; 30 Hz - 15 kHz +0,2/-1,5 dB

Stereo Separation: 50 dB at 1 kHz

AM Tuner Section

Receiving Range: 520 - 1710 kHz

Usable Sensitivity: 18 µV

Signal-to-Noise Ratio: 55 dB

General:

Power Supply: AC 120, 220, 240 V 50/60 Hz

Power Consumption: 110W / 210 VA / 100 W

Power Outlets ( non included for European Systems):

Switched : 1 x 100 W

Unswitched : 1 x 250 W

Dimensions (W x H x D): 434 x 112 x 400 mm (17-3/32" x 4-13/32" x 15-3/4")

Weight: 6,8 kg (15 lbs)

Pagine

What is stereo?