Ultimate Tracking Accuracy Combined with Full-Feature Convenience
JVC's L-E5 Linear Tracking Turntable is a masterpiece of miniaturization. Not only were our designers able to reduce outisde dimensions to little more than that of a record jacket (it's only 34 cm wide) but they were able to incorporate the most advanced and most accurate record tracking system in existence into its design. This actually contributed to the clean lines and unostentatious controls that make the L-E5 as much a pleasure to see as to hear.
Linear tracking eliminates tracking error, reduces distortion and produces clear sonic images.
The grooves in a phonograph record are the result of a parallel-tracking stuido cutting lathe and that's the way the tonearm of the :-E5 plays them back for yopu. Tracking error is eliminated and with it music marring distortion, intermodulation, crosstalk and poor separation. In the L-E5, a computer aided Electro Dynamic Servo system and a no-contact optical sensor keep the tonearm 90° tangential to the record groove from beginning to end of play.
Short low-mass straight aluminum tonearm with integrated dual-magnet cartridge.
The tonearm of the L-E5 is a studey in simplicity, its low-mass design reduces arm resonance and there is no need for the complex anti-skating compensation devices required by standard pivoted-tonearm designs. JVC's New Gimbal Support for the tonearm assures high sensitivity.
All tonearm movements are computer controlled via convenient front-edge controls.
The L-E5 is a fully automatic turntable with microcomputer controlled functions - lead-in, cue, return, or repeat. All controls are up front, outside the closed dust cover including the buttons that move the tonearm left and right for total hands-off control.
The coreless DC servo motor and JVC FG Super Servo.
Naturally the golden combination of two JVC technologies are employed to assure absolutely stable, cog-free speed accuracy.
Specifications
Motor: DC type, FG servomotor
Drive System: Direct drive
Speeds: 33-⅓ and 45 rpm
Wow and Flutter: 0,03% WRMS
Signal-to-Noise Ratio: more than 78 dB (DIN B)
Tonearm Type: Linear Tracking statically balanced low mass arm
Effective Length: 142 mm
Tracking Error: ±0,25°
Cartridge Model: MD-1034
Type: Low Mass Moving magnet
Frequency Response: 10 Hz - 25 kHz
Output: 2,4 mV
Channel Separation: 25 dB load Resistance: 47 k Ω - 100 k Ω
Compliance: 8 x 10¯⁶ cm/dyne
Stylus Tip: 0,6 mil diamond
Tracking Force: 1,5 g
Dimensions (H x W x D): 115 x 340 x 357 mm
Weight: 5,7 kg (12 lb)
Nessun commento:
Posta un commento