Super Cassette Stereo Tape Deck
Akai has done it again. The CS-50 with "Invert-O-Matic" is the first Cassette Tape Deck in the world capable of Reverse Recording and Playback
Outstanding Features
Automatic and manual reverse "invert-O-Matic"
Automatic Stop/Automatic Shut-Off (cuts off power of unit)
Continue Reverse
Push Button Control Panel (Record, rewind, Stop, Play, Fast Forward)
Slide Type Volume Controls
"See through" window for determining tape position
Two Integrated Circuits (IC)
Two VU Meters
Index Counter with Reset Button
Universal Voltage Selector and Cycle Conversion Switches
Microphone, DIN, stereo headphone jacks and Line input and output Pin jacks
Invert-O-Matic
Akai engineers have investigated and developed ways of perfecting all of the weak points in cassette recording and playback. These improvements made from every angle have been concentrated in the most "up-to-date design" to bring you the World's First top rate performance Akai Cassette Invert-O-Matic Tape Deck
The Invert-O-Matic is an epoch-making automatic reversing system. By the mere pressing of a button, the cassette will reverse itself automatically inside the tape deck. This system will not only do away with the trouble of setting the cassette by hand in future, but the new tape movement mechanism is simplified and because of the stability mechanism and high performance, this new device produces amazingly true hi-fi sound.
By depressing the Auto Button during playback, continuous revers is actuated (at the end of the tape, the cassette will automatically invert and playback will continue for as long as is desired). When the Manual Revers Button is depressed, instant manual reverse is effected.
Akai is the World's First to succeed in developing automatic and manual reverse applicable during recording. With this new mechanism, a C--120 cassette tape will accommodate two hours of uninterrupted recording.
A Wonderful Combination
The CS-50D employs the very simplest and easiest loading method. Just insert cassette into slot provided. For removal of cassette, simply press the Cassette Eject Button
The CS-50D employs a 4-Track Stereo recording and Playback System.
For playback, and external power amplifier and a pair of hi-fi speakers are required Akai Models AA-6300 amplifier and SW-125 speakers, are highly recommended.
Specifications
Tape Speed: 1-7/8 ips
Tape Speed Deviation: within ±2%
Wow and Flutter: less than 0,2% rms
Frequency Response: 30 - 16,000 Hz (±3 dB)
Signal-to-Noise Ratio: better than 45 dB RMS
Distortion: within 2% (1,000 Hz "0" VU rec)
Erase ratio: less than -70 dB
Recorder Bias Frequency: 100 kHz
Recording level Indicator: 2 VU meters
Recording/Playback Head:
Type : In-Line 4-track Stereo
Impedance: 1,100 Ω at 1 kHz
Erase head:
Type : In-Line 4-track Stereo
Impedance: 730 Ω at 100 kHz
Recording System: AC Bias system
F.F wd and rewind Time: 75 sec. C-60 cassette type
Line Output Level: 1,3 V ("0" VU) for tape recorded at "0" VU
Line Output Impedance: 10 k Ω
DIN Output Level: 0,4 V
Stereo Headphone Impedance: 8 Ω
Line Input Impedance: 220 k Ω
DIN Input Level/Impedance: 3 mV/ 25 k Ω
Mic Input Level/Impedance: 0,2 mV/4,7 k Ω
Monitor System: Stereo Headphones
Recording Capacity: 2 hrs. Stereo recording using C-120 cassette tape
Motor: Outer-rotor synchronous motor
Semiconductors: 11 Silicon Transistors; 8 Diodes; 2 ICs
Power Requirements: 100 V to 240 V AC 50/60 Hz
Power Consumption: 25 W
Dimensions (W x H x D): 375 x 160 x 287 mm(15" x 6-1/4" x 11-1/4")
Weight: 7,84 kg (15,8 lbs)
Nessun commento:
Posta un commento