The best of JVC's new lineup of high-performance cassette decks, the KD-95 features nearly all the JVC exclusives introduced on preceding pages. Its electronics and mechanism are truly sophisticated and provide the widest dynamic range, lowest distortion and least noise yet achieved in a stereo cassette configuration. Its outstanding specifications are ample evidence of a JVC engineering triumph.
Mechanical Accuracy
The JVC KD-95 employs two motors - a precision frequency-generator (FG) servomotor for capstan drive and a DC motor for reel drive, all operations are undertaken electronically by the JVC developed TTL (Transistor-Transistor Logic) IC which activates three electromagnetic plungers; a light touch of any control button allows you to move from one mode to another without having to go through Stop. Also, the deck's large flywheel - 80 mm in diameter - is coupled to the capstan to help reduce wow and flutter. And finally, a professional touch has been added to the KD-95; its head assembly has screws which allow the user to adjust the head azimuth, height and tilt.
Sophisticated Electronics
We used the best of JVC electronics technology in designing our top-of-the-line KD-95. first, its recording amp is formed of the 2-stage direct-coupled NPN configuration featuring high linearity. Second, its equalized circuit is of the DC feedback type for excellent transient characteristics and unmuddiet lows. Third, convenient Recording Equalizer and 400 Hz Signal Oscillator circuits are included.
Recording Conveniences
Inn JVC's "Real Time" pause mechanism, the heads are in contact with the tape even in the pause mode. The Timer Standby facility inside the KD-95 permits repeated, interrupted record and play - a feature rarely found on cassette decks. Also offered are two recording circuits, one for Mic/DIN input and the other for Line input, which allow you to mix microphone sounds with other sources. Plus a pair of rack-mounting brackets, which is a standard accessory in every KD-95.
Specifications
Type: Stereo cassette deck
Track System: 4-track, 2-channel
Cassettes: C-30; C-60; C-90
Frequency Response:
Chrome Tape
Nominal : 20 - 18,000 Hz
Typical : 30 - 16,000 Hz
SF Tape
Nominal : 20 - 17,000 Hz
Typical : 30 - 15,000 Hz
Signal-to-Noise Ratio: 56 dB (from peak level, weighted)
The Signal-to-Noise Ratio is improved by 5 dB at 1 kHz and by 10 dB above 5 kHz with ANRS On
Effect of ANRS (Normal Tape)
Improvement of SN : the same with ANRS
Improvement of Frequency Response : 6 dB at 10 kHz (0VU recording); 12 dB at 10 kHz (+5VU recording)
Improvement of Distortion : 3% at 10 kHz (0VU recording)
Wow and Flutter: 0,05% (WRMS); ±0,2% (DIN 45500)
Crosstalk: 65 dB
Harmonic Distortion: 1,2 %
Bias: AC bias (95 kHz)
Erasure: AC erasure (95 kHz)
Heads:
Recording/Playback : Sen-Alloy head
Erasure : Double gap, Ferrite head
Motors:
1 x FG servo DC motor
1 x DC motor
Tape Speed: 4,8 cm/sec
Fast Forward and Rewind Time: 90 sec. With C-60 cassette
Playback Equalizer Time Constant
Normal/SF Tape : 3180 µs/ 120 µs
CrO₂ Tape : 3180 µs/ 70 µs
Semiconductors: 8 ICs; 88 Transistors; 71 Diodes
Input Terminals
Mic Jack (sensitivity/Impedance): 0,2 mV/600 Ω - 10 k Ω
Input Jack (level/impedance) : 78 mV/100 k Ω
Output Terminals
Output Jack (level/Impedance) : 0 - 0,5 V / 2 - 7 k Ω
Matching Load Impedance : 50 k Ω or more
Headphone Jack (level/impedance) : 0,6 mW/ 8 Ω - 1 k Ω
DIN Socket
Min. Input Level : 0,1 mV /k Ω
Input Impedance : 11 k Ω
Output Level : 0 - 0,5 V
Output Impedance : 2 - 7 k Ω
Matching Load Impedance : 50 k Ω or more
Power Requirements: AC 100, 120, 220, 240 V 50/60 Hz
Power Consumption: 35 W
Dimensions (W x H x D): 420 x 211 x 321 mm (16-1/2" x 8-1/4" x 12-5/8")
Weight: 11 kg (24,2 lbs)
No comments:
Post a Comment