High performance Direct Access Receiver with VCR capability
Features
Direct Access quartz frequency synthesis tuning
Audio-Video control center for easy connection with video equipment
Legato Linear amplifier circuitry
Key Selling Feature Audio-Video control
The integration of audio and video equipment is finally a reality. Stereo video-cassette recorders, stereo videodiscs and monitors are taking their places beside audio equipment. The STR-VX450 provides your customer with connection facilities for all these video systems. You can hook up two video sources, such as a VCR, videodisc, or monitor TV. Plus, you can even dub from one VCR, to another. The advantage? High fidelity sound. Not the flat, lifeless sound normally associated with video. Your customers obtain it simply and easily through the STR-VX450.
Key Demonstration
Assemble the most complete audio/video system possible Demonstrate a stereo video-cassette or videodisc with the Sony receiver and a pair of separate speakers. Make sure to pick an impressive program. Point out that the consumer needs this type of hookup to appreciate the full benefits of the video sound source. A/B with video playback through mono television speakers.
Convenience Features
Audio Video Control Center - permits hookup for TV picture and sound, stereo video-cassette recorders, stereo video-cassette players. Tape copy possible from VCR-2 to VCR-1
Direct Access - design operates like a calculator keypad. Select AM or FM, then enter the frequency numbers of the station. For instance, to tune 104,30 FM, enter FM, then punch in one-zero-four-three-zero.
10 station AM or FM presets - for fast , esy selection of your favorite station
Memory scan - provides a 4 second sample of each preset station
Station Card - insert to mark preset stations
Auto tuning - between FM stations
Fluorescent display - indicates station frequency and function
Memory backup system - retains settings - even if the receiver is unplugged
Connections for two audio tape decks - with tape copying possible
VCR audio dubbing capability
Speaker switch for A, B. A &B, OFF
Technology Features
Quartz frequency synthesis - provides the most accurate, the most convenient tuning available
Sony's exclusive Direct Comparator - provides exceptionally quiet FM reception
Impedance speaker switch - 8 Ω / 4 Ω for compatibility with all speaker types
Legat Linear - amplifier circuitry eliminates switching distortion and dramatically lowers crossover distortion
Specifications
Amplifier Section
Continuous Power Output (RMS)
40 watts per channel, both channels driven into 8 Ω from 20 Hz to 20 kHz, at no more than rated Total Harmonic Distortion.
40 watts per channel, both channels driven into 4 Ω from 20 Hz to 20 kHz, at no more than rated Total Harmonic Distortion.
Total Harmonic Distortion
0,008% from 20 Hz to 20 kHz , at rated output , 8 Ω
0,02% from 20 Hz to 20 kHz, at rated output, 4 Ω
Intermodulation Distortion
0,008% (60 Hz : 7 kh = 4:1) , at rated output , 8 Ω
0,02% (60 Hz : 7 kh = 4:1), at rated output, 4 Ω
Damping Factor: 35
Frequency Response
Phono : RIAA standard curve +0,5 dB -0,5 dB
Tape, Aux : 10 Hz - 70,000 Hz -1 dB
Video : 10 Hz - 70,000 Hz -1 dB
Input Sensitivity/Impedance
Phono: 2,5 mV/ 50 k Ω
Tape, Aux : 150 mV/50 k Ω
Video : 150 mV/50 K Ω
Signal-to-Noise Ratio
Phono : 77 dB (IHF-A); 75 dB (new IHF) at 2,5 mV
Tape, Aux : 100 dB (IHF-A); 80 dB (new IHF) at 150 mV
Video : 100 dB (IHF-A); 80 dB (new IHF) at 150 mV
Speaker Impedance
4 - 16 Ω A or B
8 - 16 Ω A and B
Tuner Section
Usable Sensitivity
Mono : 11,2 dBf 92,0 µV)
50 dB Quieting Sensitivity:
Mono : 17,3 dBf (4,0 µV)
Stereo : 38,3 dBf (45 µV)
Signal-to-Noise Ratio
Mono : 80 dB
Stereo : 75 dB
Total Harmonic Distortion at 1 kHz
Mono : 0,15%
Stereo : 0,25%
Alternate Channel Selectivity, 400 kHz : 60 dB
Frequency Response: 30 Hz - 15,000 Hz +0,5 dB -2 dB
Stereo Separation: 45 dB at 1 kHz
AM Suppression: 54 dB
AM Sensitivity: 300 µV/m (built-in antenna)
AM Signal-to-Noise Ratio: 54 dB at 50 µV/m
AM Selectivity: 40 dB
General
Power Supply: AC 120 V, 220 - 240 V, 50/60 Hz
Power Consumption: 90 watts (UL)
Power Outlets: 100 Watts switched; 100 Watts unswitched
Dimensions (W x H x D): 430 x 105 x 305 mm (17" x 4-1/4" x 12-1/8")
Weight: 6,2 kg (13 lbs 11 oz)



No comments:
Post a Comment