4-channel FM/AM/FM Stereo receiver, features:
BTL circuit (20 W x 2 rms, 8 Ω , 0,8%)
IC power output section
MOS FETs FM front end
Built-in QM 4-channel matrix decoder
CD-4 4-channel adaptor terminals
Black dial
Specifications
Tuner Section
Tuning Range
FM : 88 - 108 MHz
AM : 530 - 1605 kHz
Sensitivity:
FM : 2,5 µV (IHF)
AM : 20 µV (IHF)
Signal-to-Noise Ratio
FM : 62 dB
AM : 45 dB
Capture Ratio: 2,5 dB
Image Rejection:
FM : 55 dB
AM : 35 dB
IF Rejection:
FM : 60 dB
AM : 30 dB
AM Suppression (FM): 35 dB
FM-ST Separation: 30 dB at 1000 Hz
Audio Section
Power Output: 10 W x 4 (4-ch), 20 W x 2 (BTL) rms each channel driven , 8 Ω , 0,8%
Frequency Response: 20 - 40,000 Hz ±2 dB
Power bandwidth: 20 - 30,000 Hz (IHF, 0,8%)
Signal-to-Noise Ratio
Phono : 60 dB
Aux : 70 dB
Input Sensitivity/Impedance (for rated output):
Phono : 3,0 mV/200 K Ω
CC : 30 mV/70 k Ω
Aux : 200 mV/100 K Ω
Damping Factor: 26 at 8 Ω
Tone Control: ±10 dB at 100 Hz and/or 10 kHz
Residual Noise: 0,8 mV
Loudness Control: +10 dB (ay 100 Hz); +4 dB (at 10 kHz)
Total Control
Volume : 4-gang, co-axial
Bass : 4-gang, co-axial
Treble : 4-gang, co-axial
Balance : 4 (discrete)
Selector : AM/FM auto/Phono/Aux (4-ch)
Mode : Mono/Stereo/4-ch 1 (QM)/4-ch 2 (SQ)/4-ch 3 (discrete)
Power/ Speaker Switch : PWR Off/A (4-ch)/SP Off ]/B (2-ch)
Accessory Switch : Tape monitor, 4-speaker/BTL, FM mute
Antenna
FM : 300/75 Ω terminals
AM : Ferrite core antenna, external antenna terminals
Indicator: FM-ST indicator; F/AM tuning meter
Semiconductors: 5 ICs; 3 FET, 38 Transistors; 24 Diodes
Power Requirements: AC 100/120/220/240 V, 50/60 Hz
Cabinet: metal cabinet
Dimensions (W x H x D): 400 x 125 x 290 mm (15-3/4" x 4-7/8" x 11-3/8")
Weight: 8,2 kg (18 lbs)
No comments:
Post a Comment