Fully Automatic
Belt-Drive Turntable
Features:
Fully automatic
Lead-in, Repeat, Return and Shut-Off
Four-pole
synchronous motor
Proven Belt-drive
system
New gimbal support
Cost and
performance. The relationship between these two factors has always been a
headache to designers/engineers. At JVC our engineers
tried to create -and did - a balanced turntable in the JL-F30 for any serious
audiophile, using our own 4-pole synchronous motor and the proven belt-drive
system. It's no surprise that it has a low wow and flutter of less than 0,06% (WRMS)
and a high Signal-to-Noise Ratio of
better than 67 dB (DIN-B). With the fully automatic convenience, the JL-F30
offers more performance for less investment than other automatic on the market.
The JL-F30's fully
automatic mechanism allows manual operation at any time during play. An
oil-damped arm up/down lever (CUE) is provided, so that you can cue on any of
the selections on a record, regardless of arranged sequences.
The 4-pole
synchronous motor spins the aluminum platter through the linkage of a
belt-drive system. Vibration is filtered out and speeds are kept steady against
power voltage fluctuations or load changes. JVC quality control is evident
throughout this unit. The unit also offers the benefits of a low-silhouette
design, making it perfect for any home decor, solid cabinet construction.
Parallel isolating Suspension and other features.
Specifications
Drive System: belt drive system
Drive Motor: 4-pole synchronous motor
Speeds: 33-⅓ and 45 rpm
Wow and Fluttr: less than 0,06%(WRMS)
Signal-to-Noise
Ratio: better than 57 dB (IEC-B) or
67 dB (DIN-B)
Platter: die-cast aluminum alloy
Diameter: 309 mm (12-inch)
Tonearm
Type: statically-balanced S-shaped tubular arm with
JVC developed TH balancing system and with tracking force dial of 0,5 g/steps
Effective Arm
Length: 220 mm
Tracking Error: +3°35'; -0°43'
Overhang: 15 mm
Applicable Tracking
Force range: 0,5 to 3 grams
Mountable
Cartridge: 14,5 - 22,5 g (including
Headshell)
Cartridge
Type: Moving magnet MD-1025
Stylus: 0,5 mil diamond for DT-Z1S
Optimum Tracking
Force: 1,5 to 2,0 grams (DT-Z1S)
Output: 3 mV (1 kHz)
Frequency
Response: 10 to 25,000 Hz (DT-Z1S)
Separation: better than 25 dB (1 kHz)
Load
Resistance: 47 to 100 k Ω
Compliance: 25 x 10¯⁶cm/dyne (Static); 10 x 10¯⁶cm/dyne
(Dynamic)
General
Power Source: 120, 220, 240 V 50/60 Hz
Power
Consumption: 13 watts
Dimensions (W x H x
D): 460 x 368 x 130 mm (18-1/8 x 14-1/2
x 5-1/8 inch)
Weight: 7 kg (15,4 lbs)
Nessun commento:
Posta un commento