Adcom GFA-545 represents the most advanced thinking in audio amplifier design. At 100 watts per channel, the GFA-545 offers an exceptional value; superior performance at a reasonable price.
Some of the outstanding features of this amplifier are:
100 watts per channel, 20 Hz - 20 kHz, into an 8 Ω load with both channels driven with less than 0,09% Total Harmonic Distortion.
The ability to drive low impedance loads
Large Heat sinks to dissipate heat from the power transistors
External and internal fuses which are designed to protect your loudspeakers from possible damage and also to protect the amp itself under all but the severest abuse of operating conditions.
A thermal cutoff is also employed to protect the amplifier under high temperature conditions.
Instantaneous Distortion Alert which indicates when distortion products are above the 1% level.
The instantaneous Distortion Alert is a unique distortion detection circuit which reads all forms of distortion - T.H.D., Intermodulation DIstortion, Slew Induced, and DC-offset, peak LEDs, one per channel, will glow when distortion is above 1% regardless of the load impedance or reactance in use, the LEDs may occasionally flicker under high volume listening. It they glow brightly or are on most of the time that you are listening, you are overdriving your equipment and should turn down your volume control.
The GFA-545 is a truly significant contribution to the advancement of sound technology. To ensure that the quality of construction is on par with the quality of the sonics, (a much neglected area in many other amplifiers) the GFA-535 has been carefully developed with computer controlled metal fabrication techniques that maintain 0,005 of an inch tolerances throughout. Full electrical inspection of each and every circuit board, sub-assembly , as well as the finished amplifier, provide a mechanically and sonically superior product for your enjoyment.
Specifications
Continuous Power Output (both channels, 20 Hz - 20 kHz, less than 0,09% T.H.D.):
100 watts/channel at 8 Ω
150 watts/channel at 4 Ω
Signal-to-Noise Ratio (A-weighted, Full output): better than 106 dB
Input Impedance: 22 k Ω
Input Sensitivity
For rated Output : 1,3 Volt
For 1 watt : 130 mV
Damping Factor (20 Hz - 20 kHz): better than 130
Dynamic Headroom (at 4 Ω ): 2,6 dB
Available Voltage: 120 V at 60 Hz, 220 V at 50 Hz
Dimensions (W x H x D): 432 x 140 x 318 mm (17" x 5-1/2" x 12-1/2")
Shipping Weight: 12,2 kg (27 lbs)


No comments:
Post a Comment