Semi- Automatic Direct Drive turntable
Features:
High-efficiency D-D Linear Torque Motor - wow and flutter below 0,035% (WRMS)
Super-solid resin cabinet with revolutionary "Space Saving" design
Fully-adjustable insulator feet
High-sensitivity J-shaped tonearm
Viscous-damped cueing
Full Front Operation
Variable pitch control ±3%
The pitch control knob provided lets you adjust the player's rotation precisely to the standard 33-⅓ or 45 rpm speeds, but there's another big advantage; pitch can be changed by as much as plus or minus 3 percent. Use this control when accompanying the record on your guitar or other instrument, or to vary musical pitch according to listening preference.
Easy-to-read stroboscope design
To add to the AP-2300's clean, simple appearance, the stroboscopic markings along the platter have been reduced from the usual 4 rows to 2. when employing the pitch control to adjust rotation speed, the knob should be moved until the upper or lower row of markings appears to be standing still. This indicates precise setting to the 33-⅓ and 45 rpm rotation speed , respectively.
Exclusive "Rec-Sync" disc-to-cassette automatic recording mechanism
The Ap-2300 was designed for use with other Aiwa component, but goes a step beyond mere matching for appearance sake; by connecting the cord provided with the unit from the special "rec-sync" jack at the rear panel of the AP-2300 to most Aiwa cassette deck models, player-to-cassette recording can be commenced automatically in tandem with the lowering of the played tonearm of the disc. Synchronized recording operation - it's another reason why Aiwa -built components work superbly together as well as separately.
Specifications
Drive System: Direct-drive system
Motor: 2-phase, 8-pole Slotless Hall effect motor
Turntable Platter: aluminum alloy diecast
Diameter: 306 mm
Weight: 1,0 kg
Speeds: 33-⅓ and 45 rpm
Variable Pitch Control: ±3%
Wow and Flutter: 0,035% WRMS / 0,065% DIN
Signal-to-Noise Ratio : 60 dB (IEC-B curve); 70 dB (DIN-B curve)
Tonearm
Type: Static Balanced type
Effective Arm length: 215 mm
Overhang: 15 mm
Offset Angle: 21,5 °
Tracking Error: +5,8°, +0,3°
Suitable Cartridge Weight: 3 - 12 g
Applicable Tracking Force: 0 - 3 g (direct readout of tracking force)
Cartridge Headshell Weight: 23 g (including headshell)
Cartridge Type: Moving Magnet (MM)
Output Power: 3 mV (1 kHz, 5cm/sec.)
Needle: 0,5 mil diamond
Stylus Pressure: 2 g
Frequency Response: 20 - 20,000 Hz
Semiconductors: 2 ICs; 9 Transistors; 9 Diodes,
Power Supply: AC 110-120 V, 220-240 V 50/60 Hz
Power Consumption: 6 watts
Dimensions (W x H x D): 424 x 123 x 359 mm (16-3/4" x 4-7/8" x 14-3/16")
Weight: 7 kg (15,4 lbs)


No comments:
Post a Comment