Search this site

Decibel Modus 3


E' un diffusore di concezzine originale, ma affatto nuova. Nata su un brevetto di un costruttore di Brescia,questa cassa ha la sua maggiore qualità nella assenza di problemi di dispersione orizzontale, in quanto la sistemazione dei due trasduttori all interno della cassa cilindrica rendono l'emissione perfettamente omnidirezionale, come è possibile pure rilevare dalla risposta in camera anecoica eseguita a diverse angolazioni. Questa caratteristica fa si che risultino più importanti del solito le caratteristiche dell'ambiente d'ascolto ed il suo trattamento in quanto l'emissione è appunto uguale nelle varie direzioni. Appaiono carenti le gamme media ed alta, in particolare quest'ultima, (anche per la griglia fitta) che però può essere compensata in parte agendo su una regolazione del tweeter.
Diversa da tutte le altre, questa cassa acustica cilindrica realizza un'idea non certo nuova ma sempre affascinante: quella di costruire un diffusore che sia esente dal problema della direzionalità (almeno sul piano orizzontale), in mode che l'ascolto non dipenda dalla posizione dell'ascoltatore nell'ambiente. La simmetria cilindrica è una struttura che soddisfa questa richiesta e per questo, all'interno di essa i due trasduttori per le basse e le alte frequenze sono rivolti verso l'alto cosi da non dipendere dalla posizione della cassa sul pavimento. la risposta in camera d'ascolto con rumore rosa evidenzia un calo costante della curva all'aumentare della frequenza; la stessa carenza sui medio-alti è stata notata all'ascolto, anche se compensata in parte agendo sull'apposito trimmer a vite posto sotto al mobile assieme ai morsetti per il collegamento all'amplificatore. Non emerge una chiara individualità di questo diffusore all'ascolto, il cui giudizio è stato compromesso anche dalla posizione non ottimale nell'ambiente d'ascolto, che proprio in vitrù della omnidirezionalità agisce sensibilimente sulla resa; la possiamo tuttavia ritenere più adatta alla riproduzione di musica da camera e classica in genere, con una buona timbrica in caso di pochi strumenti ma una tendenza ad "impastare" nei pezzi orchestrali e pieni.
La realizzazione del mobile è accurata e può essere richiesta sia la versione noce che quella laccata in bianco; la sistemazione è da pavimento. La Modus 3 è nominalmente una 40 Watt e pesa ben 30 kg.
Non ha piedini di appoggio ma la parte centrale della base è sollevata rispetto al bordo per permettere l'alloggio dei morsetti di collegamento, che non è dei più comodi; i cavi possono essere fatti passare attraverso delle scanalature. Per la sua prerogativa che la contraddistingue ( e brevettata dal costruttore bresciano) il diffusore è battezzato Sistema 360, come i modelli che utilizzano il medesimo principio.
La potenza sopportabile da questa cassa è senz'altro superiore a quella prudenzialmente dichiarata dal costruttore.

Caratteristiche:
Sistema: omnidirezionale
Numero vie: 2
Altoparlanti: 1 woofer, 1 tweeter a compressione
Impedenza nominale: 8 ohm
Potenza nominale: 40 Watt
Potenza consigliata: 100 Watt
Dimensioni: 800 x 425 mm (altezza x diametro)
Peso: 30 kg

LEAK Delta 70 (1972)


Circuit description
Power Amplifier - The output transistors and temperature compensation diodes are mounted on the heat sink, the remainder of the circuitry being located on the power amplifier P.C. boards. Power transistors are insulated electrically from the chassis by mica washers.
Quiescent current is measured by removing the appropriate HT fuse, and inserting a current meter. The current is adjusted by P% and should be approximately 40mA.
The amplifier D.C. output voltage (pin D on power amp board) should be +37 V with an HT supply of +75 V. This voltage is set by fixed circuit components, and significant deviation of this "midpoint" voltage indicates component failure,not necessarily an output transistor.
Full output for each channel is realised with 16 - 7 V RMS across an 8 ohm load.

Pre-Amplifiers
The P.C. contains tone control circuitry (excluding potentiometers) R1AA equalisation for disc input, filter components, and appropriate amplification for all inputs.
With all inputs short circuit, volume control maximum, other controls level, noise output voltages should be less than the following: 7-5 mV on Tuner and Replay, 22 mV on other inputs
The sensitivities for each input to provide full output are indicated in the specifications (1 kHz sine wave). The corresponding output from the preamplifier,measured at the tape sockets is: phono socket output 400 mV approx. DIN output 40 mV approx.


Specification
Rated Power Output:
40 + 40 watts into 4 ohms,
35 + 35 watts into 8 ohms,
28 + 28 watts into 15 ohms.
Music Power Output (IHF):
100 watts into 4 ohm loudspeakers,
90 watts into 8 ohm loudspeakres,
60 watts into 15 ohm loudspeakers.
Total Harmonic Distortion: 0-1% at ALL power levels up to 25 watts at 1 kHz each channel into 8 ohm loudspeakers.
Total Intermodulation Distortion: Input - 70 Hz anf 7 kHz in ratio of 4:1, Less than 0-5% for ALL power levels up to 35 watts into 8 ohms
Hum and Noise: 66 dB below 30 watts into 8 ohm load on Tuner and Replay and 56 dB below 30 watts on other inputs.
Cross Talk: between L and R channels, -50 dB up to 1kHz and -30 dB at 10 kHz.
Input Sensitivities:
Disc 1 (RIAA Characteristic) 2 mV at 1 kHz Input Impedance 47 kohm.
Disc 2 (RIAA Characteristic) 10 mV or 30 mV at 1 kHz Input Impedance 33 kohm, 100 kohm.
(Selected by switched input attenuator marked HI and LO on rear panel).
Damping Factor:
40 measured at 1 kHz for 15 ohm loudspeakers.
20 measured at 1 kHz for 8 ohm loudspeakers.
Tuner 1 Mic
25 mV or 2 mV
47 kohm, 47 kohm
Tuner 2:
60 mV or 250 mV
50 kohm, 50 kohm
(Selected by switched input attenuator marked HI and LO on rear panel).
Replay:
400 mV
47 kohm
Frequency Response: 30 Hz to 20,000 Hz (±1 dB)
Tone Control Range: 50 Hz to 14,000 Hz (±16 dB)
Filter: 12 dB per octave rolloff above 6 kHz
Dimensions: 344 x 118 x 238 mm


Onkyo Reference Series (80's-Styled Separate Hi-Fi Components)


Onkyo’s new range of hi-fi components are styled after the company’s classic stereo models of the 1980s. All three components, the P-3000R pre-amplifier, M-5000R power amplifier, and C-7000R CD player, incorporate Onkyo’s new Dynamic Intermodulation Distortion Reduction Circuitry (DIDRC) to counteract unwanted high-frequency interference, promising audio playback that is more faithful to the original source. To further reduce interference, these components feature separate digital and analog circuitry. The P-3000R pre-amp accepts both analog and digital sources, with connectivity options including AES/EBU digital connectors and a USB input for PC audio. A high-quality 32-bit Burr-Brown DAC is provided for each stereo channel, to optimize audio performance. The M-5000R power-amp offers the advanced AWRAT amplification design which combines DIDRC with a low NFB design, closed groundloop circuits, and high instantaneous-current capability. To ensure minimal signal interference, the C-7000R CD player employs a thermally regulated, high-precision clock with a state-of-the- art crystal oscillator. To further reduce potential interference, the player can be operated in analog-only or digital-only mode.

Onkyo P-3000R


Two-Channel Pre-Amp Delivers Sublime Audio
Despite being at the cutting edge of the burgeoning home theater market, Onkyo has never forgotten its roots in pure hi-fi audio. With the P-3000R, we present a streamlined two-channel pre-amplifier that packs a treasure trove of stunning audio technology. The P-3000R handles both analog and digital sources, with connectivity options including AES/EBU digital connectors and a USB device for PC audio. Separate 192 kHz/32-bit TI Burr-Brown DACs for each channel ensure accurate digital-to-analog conversion. Meanwhile, to minimize interference and maintain signal quality, the P-3000R employs noise-reducing DIDRC technology, a vibration-resistant chassis design, and independent amplifier circuitry. Thanks to the P-3000R’s bi-amping capability, you also have greater flexibility in how you set up your system. As always, the job of all this advanced hardware is to bring you closer to your music and let you feel the unique resonance of each individual instrument.
Special Features
DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry)
PLL (Phase Locked Loop) Ultra-Low Jitter Technology
Separate TI Burr-Brown 192 kHz/32-Bit DACs (PCM1795 x 2) for L/R Channels
Amphenol AES/EBU Balanced Digital Input
USB Device (C-Media CM6631) for 192 kHz/32-Bit HD Audio from PC*
Playback of PC audio requires dedicated software that can be downloaded from an Onkyo website
Processing
DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry)
Separate Digital/Analog Circuitry
Separate Massive Transformers for Digital/Analog Circuitry (Toroidal for Analog)
Anti-Vibration Side-Mounted Circuit Board Construction
Sampling Rate Convertor (Up to 192 kHz)
192 kHz/32-Bit DACs (Burr-Brown PCM1795 x 2)
Direct Mode
Discrete Phono Equailizer
Connectivity
Phono Input (MM)
USB Input (for 192 kHz/32-Bit HD Audio from PC*)
AES/EBU Balanced Digital Input (XLR)
Digital Inputs (optical/coaxial) (2/2)
Digital Output (Optical)
Separate L/R Bi-Amp-Capable Pre-Outs
Gold-Plated, Machined Solid Brass, 19mm-Pitch Audio Terminals
Miscellaneous
High-rigidity, anti-resonant chassis
Separate Anti-Vibration Aluminum Panel Construction (Top, Front, Sides)
Tone Control (Bass/Treble)
Independent Headphone Amplifier
12 V Trigger Output
Display Dimmer (Normal/Dim/Off)
Detachable AC Cord

Product Specifications
THD + N (Total Harmonic Distortion+Noise): 0.005% (20 Hz–20 kHz, Power Rated)
Input Sensitivity and Impedance (Unbalance): 200 mV/47 k-ohms (Line); 2.7 mV/47 k-ohms (Phono MM)
Rated RCA Output Level and Impedance: 1 V/330 ohms (Pre out)
Maximum RCA Output Level and Impedance: 5.0 V/330 ohms (Pre out)
Phono Overload: 80 mV (MM, 1 kHz, 0.5%)
Frequency Response: 5 Hz–100 kHz/+0 dB, -3 dB (Line)
Tone Control Charcteristics: ±8 dB, 50 Hz (BASS); ±8 dB, 20 kHz (TREBLE)
Signal to Noise Ratio: 110 dB (Direct, IHF-A); 80 dB (Phono, IHF-A)
Digital Inputs:
Optical: 2; Coaxial: 2; 2ch PCM; Digitial Input Sampling Rate:;32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz;compaitible (OPT);32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz/;176.4 kHz/192 kHz compatible;(COAX, AES/EBU);44.1 kHz/48 kHz/88.2 kHz/96 kHz/192 kHz compatible;(USB)
Analog Stereo Inputs: PHONO, CD, LINE 1, LINE 2, TAPE (LINE 3)
Balanced Input: AES/EBU (DIGITAL)
Digital Outputs:
Optical: 1;Digital Output Sampling Rate:;32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz;compatible (OPT)
Analog Stereo Outputs: TAPE (LINE)
Pre Outputs: 2
Phones: 1 (6.3 Ø)
12 V Trigger Output: x 1
RI: x 1
PC Interface: USB
Power Supply: AC 120V~, 60 Hz
Power Consumption: 26 W
Dimensions: 17 1/8" x 3 7/8" x 13 1/8" (435 x 99 x 333.1 mm)
Weight: 24.3 lbs. (11.0 kg)