What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





Janszen Model Z-210

Over the years the electrostatic loudspeaker has been recognized by audiophiles as the most accurate acoustic transducer. Its widespread use has been limited in the past by its high cost, rumors about problems with humidity and limited power capacity, and a general fear by the less sophisticated audiophile of such an unusual looking device, plus its esoteric operating principles.

Since Arthur A. Janszen developed what is known as the push-pull electrostatic element in 1949, JANSZEN has been manufacturing these speakers. Combining years of manufacturing experience with research, we have developed a new improved electrostatic radiator that truly represents fourth generation technology. This new driver is manufactured to tolerances so precise that typical units are within 0,5 dB of our specifications. Furthermore the new electrostatic have proven so totally reliable and rugged under all weather and power conditions that we have elected to offer an unprecedented "Five Year Conditional Warranty". The overall system is warranted for parts and labor for five years commencing on the date of original purchase from a franchised JANSZYN dealer. To deny the musical integrity of Janszen Electrostatic speakers would be to deny the laws of physics.

Special Features:

Super clean and smooth "mids" and "highs"

Solis bass

Efficient

Ultra-low distortion

Small size

Electrostatic sound at a modest price

Overall Acoustic Specifications

Frequency Response: 40 - 20,000 Hz ±3 dB; 35 - 30,000 Hz ±6 dB

Minimum RMS Power Required: 15 watts

Maximum RMS Power Handling: 74 watts

Low Frequency Transducer

Type: Dynamic, Acoustic Suspension

Cone Diameter: 254 mm (10 inch)

Voice Coil Diameter: 38,1 mm (1,5 inch)

Total System Resonance: 48 Hz

Q Factor (Damping Characteristic): 1,1

Crossover Configuration: Mass Loaded

Crossover Point: 800 Hz

Nominal Impedance: 4Ω

High Frequency Transducer

Type: Electrostatic

Radiating Area: 206 cm² (32 sq. inch)

Polarization Voltage: 1200 Vdc

Distortion THD 9Over operating range): 0,5%

Crossover Point: 1800 Hz 12 dB/octave

Dispersion: 50° Horizontal, 30° Vertical

Power Supply Type: Full Wave Voltage Multiplier

Power Requirements: Local AC Line Voltage, 50/60 Hz , 2 Watts

Dimensions (H x W x D): 470 x 318 x 280 mm (18½" x 12½x 11")

Cabinet Finish: Walnut Vinil (W) Black Cloth-Grill

Shipping weight: 12,5 kg (28 lbs) Pair

Nessun commento:

Posta un commento