Garrard GT-35 turntable

The GT35 is a perfect example of meticulous engineering. Everything about it - its impressive rumble, wow and flutter specifications, its low tonearm mass and low bearing friction - confirm the visual and tactile impressions you get of high performance.

The tonearm

Garrard engineering has given special attention to this critical aspect of record play. The tonearm of the GT35 weighs just 12 grams, lower than any automatic turntable in its price range. The tonearm features an ultra-light magnesium headshell and jewel bearings ensure that the finest and lightest tracking cartridges will perform up to their maximum capability.

The motor

A DC servo-controlled unit incorporating electronic sub circuits in a self-correcting network. Rumble, wow and flutter specifications rival the finest turntables, including the expensive direct drive units. The GT35 motor rotates records at rock-steady speed with total freedom from AC vibration.

The platter

Dynamically balanced and die-cast from a special aluminum alloy, assuring uniform density. It is rotated by a precision-ground flexible belt, further reducing vibration. The GT35 specifications are well within the professional transcription category.

 

 

Variable speed

Electronic control with independent adjustments for 33-⅓ and 45 rpm. Correct speed is monitored by a stroboscope cast into the periphery of the platter. It is illuminated by an LED ( rather than the usual neon) resulting in a distinct image easily read, even in a brightly lit room.

Base and dust cover

Both the glass filled polyester  upper section and lower wooden section of the base form a barrier against vibration and resonance. Special shock absorbent feet minimize acoustic feedback. The dust cover pivots freely and can be raised and lowered even while a record is being played.

The Delglide Automatic System in the GT35 offers unerring accuracy and silent and sure operation. The combination of measured performance and features achieves the goal of its designers totally gratifying music reproduction.

 

Specifications

Motor:  DC multi-pole servo controlled

Drive:  belt-drive

Speeds:  33-13 and 45 rpm,

Speed Adjustment:  ±3%each

Platter:  298/317 mm diameter die-cast aluminum with integral strobe bars

Moment of Inertia:  263 kg/cm² (including mat)

Platter Weight:  1,58 kg (3,48 lb) approx.

Wow and Flutter:  ±10% weighted peak to DIN 45507

Rumble:

Unweighted DIN-A :  -45 dB

Weighted DIN-B :  -65 dB

Tonearm Type:  Direct static-balance, "S" shape aluminium tubular

Effective Length:  230 mm (9,055 in)

Overhang:  17 mm (0,670 in)

Offset:  23°24'

Tracking Error:  +0,36'/cm (at 5,14 cm radius); -0,145'/cm (at 8,25 cm radius)

Zero error at 6,25 cm radius and 11,15 cm radius

Effective Mass (with Shure M95ED):  18,86 g

Horizontal Pivot Friction (with ref. To stylus):  40 mg

Vertical Pivot Friction:  30 mg

Acceptable Cartridge Weight:  4 to 9 g

Adjustable Stylus Force Range:  0 to 3 g (direct reading calibration)

Minimum Tracking Force:  0,75 g

Power Requirements:  110/125 VAC or 220/240 V Ac, 50 /50 Hz

Power Consumption:  2,5 Watts

Dimensions (W x H x D):  450 x 360 x 195 mm 17,7" x 14,15" x 7,69") 

Weight:  6,5 kg (14,4 lb)