What is stereo?

There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.

H.H. Scott '59

Audiolab 8000P Power amplifier

Audiolab 8000P

Stereo Power Amplifier

The Audiolab 8000P Stereo Power Amplifier delivers over 100 watts per channel. peak output current of over 40 amps and exceptionally low distortion guarantees perfect operation with all types of loudspeakers and cables. aTwo sets of heavy duty speaker terminals allow for connection of bi-wired speakers. Input loud sockets make it easy to connect additional power amplifiers for bi-amplified systems. The dual-mono configuration of the 8000P ensures exceptional isolation between channels.

If you already own an Audiolab 8000A Integrated Amplifier you can upgrade by adding the 8000P.

Specifications :

Rated output power: 100 W per channel into rated load impedance (8 ohm), 150 W into 4 ohm

Typical output power: 120 W per channel into rated load impedance (8 ohm), 180 W into 4 ohm

Input for full rated power: 1.0 V rms

Input impedance: 47 kohm nominal

Gain: 29.0 dB at 1 kHz

Signal to noise: Greater than 95 dB (relative to 0 dBW)

Frequency response: (-3 dB) 0.1 Hz - 75 kHz

Frequency response: (±0.3dB) 20 Hz - 20 kHz

Total harmonic distortion & noise: Less than 0.05%

Dimensions (W x D x H): 445 x 337 x 74 mm

Weight: 9 kg

Nessun commento:

Posta un commento